TPS75801, TPS758A01
TPS75815, TPS75818
TPS75825, TPS75833
www.ti.com
SLVS330F–JUNE 2001–REVISED APRIL 2007
FAST-TRANSIENT RESPONSE, 3A, LOW-DROPOUT VOLTAGE REGULATORS
Quiescent current is 125µA at full load and drops to
less than 1µA when the device is disabled. The
TPS758xx is designed to have fast transient
response for large load current changes.
FEATURES
•
3A Low-Dropout Voltage Regulator
•
Available in 1.5V, 1.8V, 2.5V, and 3.3V
Fixed-Output and Adjustable Versions
Because the PMOS device behaves as a low-value
resistor, the dropout voltage is very low (typically
150mV at an output current of 3A for the TPS75833)
and is directly proportional to the output current.
Additionally, since the PMOS pass element is a
voltage-driven device, the quiescent current is very
low and independent of output loading (typically
125µA over the full range of output current). These
•
•
Dropout Voltage Typically 150mV at 3A
(TPS75833)
VREF and Pinout Compatible with MIC29302
(TPS758A01)
•
•
•
Low 125µA Typical Quiescent Current
Fast Transient Response
3% Tolerance Over Specified Conditions for
Fixed-Output Versions
two
key
specifications
yield
a
significant
improvement in operating life for battery-powered
systems.
•
•
Available in 5-Pin TO-220 and TO-263
Surface-Mount Packages
The device is enabled when EN (enable) is
connected to a high voltage level (> 2V). Applying a
low voltage level (< 0.7V) to EN shuts down the
regulator, reducing the quiescent current to less than
1µA at TJ = +25°C.
Thermal Shutdown Protection
DESCRIPTION
The TPS758xx family of 3A low dropout (LDO)
regulators contains four fixed voltage option
regulators and an adjustable voltage option
regulator. These devices are capable of supplying 3A
The TPS758xx is offered in 1.5V, 1.8V, 2.5V, and
3.3V fixed-voltage versions and in an adjustable
version (programmable over the range of 1.22V to
5V). Output voltage tolerance is specified as a
maximum of 3% over line, load, and temperature
ranges. The TPS758xx family is available in a 5-pin
TO-220 (KC) and TO-263 (KTT) packages.
of output current with
a
dropout of 150mV
(TPS75833). Therefore, the device is capable of
performing a 3.3V to 2.5V conversion.
TO−220 (KC) PACKAGE
(TOP VIEW)
TPS75833
DROPOUT VOLTAGE
vs
TPS75815
LOAD TRANSIENT RESPONSE
JUNCTION TEMPERATURE
EN
IN
GND
1
2
3
4
5
250
200
150
100
50
150
100
50
IO = 3 A
VO = 3.3 V
VO = 1.5 V
µ
CO = 100
F
OUTPUT
FB/NC
0
TO−263 (KTT) PACKAGE
(TOP VIEW)
−50
100
150
di
dt
0.75 A
s
−
−
=
EN
IN
1
2
3
4
5
3
0
GND
OUTPUT
FB/NC
0
−
−
−
40 25 10
5
20 35 50 65 80 85 110 125
0
20 40 60 80 100 120 140 160 180 200
TJ −Junction Temperature −_C
t −Time −µs
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Copyright © 2001–2007, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.