ꢀ ꢁꢂ ꢃ ꢄ ꢅ ꢆ ꢅꢇ ꢈꢅ ꢉ ꢊ ꢃ ꢄ ꢅꢅ ꢄ ꢇꢈꢅ ꢉ ꢊꢃ ꢄ ꢅꢅ ꢋ ꢇꢈ ꢅ ꢉ ꢊꢃ ꢄ ꢅ ꢌ ꢄ ꢇꢈ ꢅ ꢉ ꢊꢃ ꢄ ꢅ ꢍ ꢍ ꢇꢈ ꢅ ꢎ ꢏꢀ ꢐ ꢁꢑ ꢎ ꢒꢓ ꢔ ꢑ ꢑ ꢕ
ꢀ ꢁꢂ ꢃ ꢄꢍ ꢆ ꢅꢇꢈ ꢅ ꢉ ꢀꢁ ꢂ ꢃ ꢄ ꢍ ꢅ ꢄꢇꢈ ꢅ ꢉ ꢀꢁ ꢂꢃ ꢄ ꢍ ꢅ ꢋ ꢇꢈ ꢅ ꢉ ꢀ ꢁꢂꢃ ꢄ ꢍ ꢌ ꢄ ꢇꢈ ꢅ ꢉ ꢀ ꢁꢂꢃ ꢄ ꢍ ꢍ ꢍ ꢇꢈ ꢅ ꢎ ꢏꢀ ꢐ ꢓ ꢒꢂ ꢒ ꢀ
ꢖꢗꢂ ꢀꢇꢀ ꢓꢗꢘ ꢂꢏ ꢒ ꢘꢀꢇꢓꢒ ꢂ ꢁꢑ ꢘꢂꢒ ꢅ ꢙꢄ ꢇꢗ ꢚ ꢑ ꢎꢇꢕꢓꢑ ꢁꢑ ꢛꢀ ꢜꢑ ꢚꢀꢗꢔ ꢒ ꢓꢒ ꢔꢛꢚ ꢗꢀꢑ ꢓꢂ
ꢝ
SGLS159A − APRIL 2003 − REVISED APRIL 2008
PWP PACKAGE
(TOP VIEW)
D
Qualified for Automotive Applications
ESD Protection Exceeds 2000 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
D
GND/HEATSINK
GND/HEATSINK
NC
NC
GND
NC
NC
NC
NC
1
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
13
12
11
NC
IN
IN
D
D
D
D
D
D
D
D
1.5-A Low-Dropout Voltage Regulator
Available in 1.5-V, 1.8-V, 2.5-V, 3.3-V, Fixed
Output and Adjustable Versions
EN
†
PG or RESET
Open Drain Power-Good (PG) Status
Output (TPS751xxQ)
FB/SENSE
OUTPUT
OUTPUT
Open Drain Power-On Reset With 100-ms
Delay (TPS753xxQ)
NC
GND/HEATSINK
GND/HEATSINK
Dropout Voltage Typically 160 mV at 1.5 A
(TPS75133Q)
NC − No internal connection
PG is on the TPS751xx and RESET is on the TPS753xx
†
Ultralow 75 µA Typical Quiescent Current
Fast Transient Response
2% Tolerance Over Specified Conditions
For Fixed-Output Versions
D
20-Pin TSSOP (PWP) PowerPAD Package
Thermal Shutdown Protection
D
description
The TPS753xxQ and TPS751xxQ are low dropout regulators with integrated power-on reset and power-good (PG)
functions respectively. These devices are capable of supplying 1.5 A of output current with a dropout of 160 mV
(TPS75133Q, TPS75333Q). Quiescent current is 75 µA at full load and drops down to 1 µA when the device is
disabled. TPS751xxQ and TPS753xxQ are designed to have fast transient response for larger load current
changes.
Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 160 mV at an
output current of 1.5 A for the TPS75x33Q) and is directly proportional to the output current. Additionally, since the
PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading
(typically 75 µA over the full range of output current, 1 mA to 1.5 A). These two key specifications yield a significant
improvement in operating life for battery-powered systems.
The device is enabled when EN is connected to a low level voltage. This LDO family also features a sleep mode;
applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1
µA at T = 25°C.
J
For the TPS751xxQ, the power-good terminal (PG) is an active high, open drain output, which can be used to
implement a power-on reset or a low-battery indicator.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments.
ꢁ
ꢁ
ꢓ
ꢑ
ꢮ
ꢕ
ꢩ
ꢛ
ꢞ
ꢧ
ꢀ
ꢨ
ꢏ
ꢢ
ꢑ
ꢠ
ꢘ
ꢡ
ꢕ
ꢗ
ꢀ
ꢗ
ꢟ
ꢠ
ꢪ
ꢡ
ꢢ
ꢨ
ꢣ
ꢤ
ꢥ
ꢥ
ꢦ
ꢦ
ꢟ
ꢟ
ꢢ
ꢢ
ꢠ
ꢠ
ꢟ
ꢧ
ꢧ
ꢫ
ꢨ
ꢩ
ꢦ
ꢣ
ꢯ
ꢣ
ꢪ
ꢪ
ꢠ
ꢦ
ꢥ
ꢤ
ꢧ
ꢧ
ꢢ
ꢡ
ꢫ
ꢀꢪ
ꢩ
ꢬ
ꢧ
ꢭ
ꢟ
ꢨ
ꢥ
ꢧ
ꢦ
ꢟ
ꢦ
ꢢ
ꢣ
ꢠ
ꢩ
ꢮ
ꢥ
ꢠ
ꢦ
ꢦ
ꢪ
ꢧ
ꢙ
Copyright 2008, Texas Instruments Incorporated
ꢣ
ꢢ
ꢨ
ꢦ
ꢢ
ꢣ
ꢤ
ꢦ
ꢢ
ꢧ
ꢫ
ꢟ
ꢡ
ꢟ
ꢨ
ꢪ
ꢣ
ꢦ
ꢪ
ꢣ
ꢢ
ꢡ
ꢰ
ꢥ
ꢏ
ꢠ
ꢤ
ꢪ
ꢧ
ꢦ
ꢥ
ꢠ
ꢮ
ꢥ
ꢣ
ꢮ
ꢱ
ꢥ
ꢦꢪ ꢧ ꢦꢟ ꢠꢳ ꢢꢡ ꢥ ꢭꢭ ꢫꢥ ꢣ ꢥ ꢤ ꢪ ꢦ ꢪ ꢣ ꢧ ꢙ
ꢣ
ꢣ
ꢥ
ꢠ
ꢦ
ꢲ
ꢙ
ꢁ
ꢣ
ꢢ
ꢮ
ꢩ
ꢨ
ꢦ
ꢟ
ꢢ
ꢠ
ꢫ
ꢣ
ꢢ
ꢨ
ꢪ
ꢧ
ꢧ
ꢟ
ꢠ
ꢳ
ꢮ
ꢢ
ꢪ
ꢧ
ꢠ
ꢢ
ꢦ
ꢠ
ꢪ
ꢨ
ꢪ
ꢧ
ꢧ
ꢥ
ꢣ
ꢟ
ꢭ
ꢲ
ꢟ
ꢠ
ꢨ
ꢭ
ꢩ
ꢮ
ꢪ
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265