TPS74701-Q1
www.ti.com
SBVS141A –APRIL 2010–REVISED SEPTEMBER 2010
500-mA LOW-DROPOUT LINEAR REGULATOR WITH PROGRAMMABLE SOFT-START
Check for Samples: TPS74701-Q1
1
FEATURES
DESCRIPTION
•
Qualified for Automotive Applications
The TPS74701 low-dropout (LDO) linear regulator
provides an easy-to-use, robust power management
•
•
•
•
•
VOUT Range: 0.8 V to 3.6 V
Ultralow VIN Range: 0.8 V to 5.5 V
VBIAS Range 2.7 V to 5.5 V
solution for
a
wide variety of applications.
User-programmable soft-start minimizes stress on the
input power source by reducing capacitive inrush
current on start-up. The soft-start is monotonic and
well-suited for powering many different types of
processors and ASICs. The enable input and power
good output allow easy sequencing with external
regulators. This complete flexibility permits the user to
configure a solution that meets the sequencing
requirements of FPGAs, DSPs, and other
applications with special start-up requirements.
Low Dropout: 50 mV typ at 500 mA, VBIAS = 5 V
Power Good (PG) Output Allows Supply
Monitoring or Provides a Sequencing Signal
for Other Supplies
•
•
2% Accuracy Over Line/Load/Temperature
Programmable Soft-Start Provides Linear
Voltage Startup
•
VBIAS Permits Low VIN Operation with Good
Transient Response
A precision reference and error amplifier deliver 2%
accuracy over load, line, temperature, and process.
The device is stable with any type of capacitor
greater than or equal to 2.2mF, and is fully specified
from –40°C to +125°C. The TPS74701 is offered in a
small 3mm × 3mm SON-10 package for compatibility
with the TPS74801.
•
•
Stable with Any Output Capacitor ≥ 2.2 mF
Available in a Small 3mm × 3mm × 1mm
SON-10 Package
APPLICATIONS
•
•
•
•
FPGA Applications
DSP Core and I/O Voltages
Post-Regulation Applications
Applications with Special Start-Up Time or
Sequencing Requirements
•
Hot-Swap and Inrush Controls
CSS = 0nF
CSS = 560pF
CSS = 5600pF
0.5V/div
VOUT
VIN
IN
PG
R3
R1
CIN
BIAS
EN
SS
VOUT
OUT
TPS74701
VBIAS
3.8V
COUT
VEN
FB
GND
CBIAS
1.8V
CSS
1V/div
R2
Time (2ms/div)
Figure 2. Turn-On Response
Figure 1. Typical Application Circuit (Adjustable)
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010, Texas Instruments Incorporated