TPS73101-EP, TPS73115-EP
TPS731125-EP, TPS73118-EP, TPS73125-EP, TPS73130-EP
TPS73132-EP, TPS73133-EP, TPS73150-EP
www.ti.com
SGLS347A–JUNE 2006–REVISED SEPTEMBER 2007
CAP-FREE NMOS 150 mA LOW DROPOUT REGULATOR
WITH REVERSE CURRENT PROTECTION
1
FEATURES
2
•
Controlled Baseline
•
•
•
Low Noise: 30 μVRMS Typ (10 kHz to 100 kHz)
–
–
–
One Assembly
Test Site
0.5% Initial Accuracy
1% Overall Accuracy Over Line, Load, and
Temperature
One Fabrication Site
•
•
•
Less Than 1 μA Maximum IQ in Shutdown
Mode
•
•
Extended Temperature Performance of
–55°C to 125°C
Thermal Shutdown and Specified Min/Max
Current Limit Protection
Enhanced Diminishing Manufacturing Sources
(DMS) Support
Available in Multiple Output Voltage Versions
•
•
•
Enhanced Product-Change Notification
(1)
–
–
–
Fixed Outputs of 1.2 V to 5 V
Adjustable Outputs from 1.2 V to 5.5 V
Custom Outputs Available
Qualification Pedigree
Stable With No Output Capacitor or Any Value
or Type of Capacitor
•
•
•
Input Voltage Range of 1.7 V to 5.5 V
APPLICATIONS
Ultralow Dropout Voltage: 30 mV Typical
•
•
•
•
Portable/Battery-Powered Equipment
Post-Regulation for Switching Supplies
Noise-Sensitive Circuitry such as VCOs
Point of Load Regulation for DSPs, FPGAs,
ASICs, and Microprocessors
Excellent Load Transient Response—With or
Without Optional Output Capacitor
•
New NMOS Topology Provides Low Reverse
Leakage Current
(1) Component qualification in accordance with JEDEC and
industry standards to ensure reliable operation over an
extended temperature range. This includes, but is not limited
to, Highly Accelerated Stress Test (HAST) or biased 85/85,
temperature cycle, autoclave or unbiased HAST,
electromigration, bond intermetallic life, and mold compound
life. Such qualification testing should not be viewed as
justifying use of this component beyond specified
performance and environmental limits.
DESCRIPTION/ORDERING INFORMATION
The TPS731xx family of low-dropout (LDO) linear voltage regulators uses a new topology: an NMOS pass
element in a voltage-follower configuration. This topology is stable using output capacitors with low ESR and
even allows operation without a capacitor. It also provides high reverse blockage (low reverse current) and
ground pin current that is nearly constant over all values of output current.
The TPS731xx uses an advanced BiCMOS process to yield high precision while delivering low dropout voltages
and low ground pin current. Current consumption, when not enabled, is under 1 μA and ideal for portable
applications. The low output noise (30 μVRMS with 0.1 μF CNR) is ideal for powering VCOs. These devices are
protected by thermal shutdown and foldback current limit.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006–2007, Texas Instruments Incorporated