TPS71501-Q1
TPS71525-Q1, TPS71530-Q1
A
c
t
u
a
l
S
i
z
e
(
2
,
1
5
m
m
x
2
,
3
m
m
)
TPS71533-Q1, TPS71550-Q1
www.ti.com
SGLS272C–OCTOBER 2004–REVISED APRIL 2007
50-mA, 24-V, 3.2-µA Supply Current
Low-Dropout Linear Regulators in SC70 Package
FEATURES
APPLICATIONS
•
•
•
Ultra-Low-Power Microcontrollers
Cellular/Cordless Handsets
Portable/Battery-Powered Equipment
•
Qualification in Accordance With
(1)
AEC-Q100
•
•
Qualified for Automotive Applications
Customer-Specific Configuration Control Can
Be Supported Along With Major-Change
Approval
DESCRIPTION
The TPS715xx low-dropout (LDO) voltage regulators
offer the benefits of high input voltage, LDO voltage,
low-power operation, and miniaturized packaging.
The devices, which operate over an input range of
2.5 V to 24 V, are stable with any capacitor
(>0.47 µF). The LDO voltage and low quiescent
current allow operations at extremely low power
levels. Therefore, the devices are ideal for powering
battery-management ICs. Specifically, since the
devices are enabled as soon as the applied voltage
reaches the minimum input voltage, the output is
quickly available to power continuously operating
battery-charging ICs.
•
•
•
•
•
24-V Maximum Input Voltage
Low 3.2-µA Quiescent Current at 50 mA
Stable With Any Capacitor (>0.47 µF)
50-mA Low-Dropout Regulator
Available in 2.5 V, 3 V, 3.3 V, 5 V, and
Adjustable (1.2 V to 15 V)
•
•
•
Minimum/Maximum Specified Current Limit
5-Pin SC70/SOT-323 (DCK) Package
–40°C to 125°C Specified Junction
Temperature Range
The usual PNP pass transistor has been replaced by
a PMOS pass element. Because the PMOS pass
element behaves as a low-value resistor, the LDO
voltage, typically 415 mV at 50 mA of load current, is
directly proportional to the load current. The low
quiescent current (3.2 µA typ) is stable over the
entire range of output load current (0 mA to 50 mA).
(1) Contact Texas Instruments for details. Q100 qualification data
available on request.
DCK PACKAGE
(TOP VIEW)
OUT
TPS715xx
MSP430
IN
FB/NC
GND
NC
1
2
5
OUT
IN
Li–
3
4
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
AVAILABLE OPTIONS(1)
TJ
VOLTAGE
PACKAGE
PART NUMBER
SYMBOL
ANU
2.5 V
SC70/SOT-323 (DCK)
SC70/SOT-323 (DCK)
SC70/SOT-323 (DCK)
SC70/SOT-323 (DCK)
SC70/SOT-323 (DCK)
TPS71525QDCKRQ1
TPS71530QDCKRQ1
TPS71533QDCKRQ1
TPS71550QDCKRQ1
TPS71501QDCKRQ1
3 V
ANV
–40°C to 125°C
3.3 V
5 V
ANW
ANX
(Adjustable) 1.2 V–15 V
ANS
(1) Contact Texas Instruments for other voltage options between 1.25 V and 5.85 V.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2004–2007, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.