TPS65148
www.ti.com ........................................................................................................................................................................................................ SLVS904–MAY 2009
Compact TFT LCD Bias IC for Monitor with VCOM Buffer, Voltage Regulator for Gamma
Buffer and Reset Function
1
FEATURES
•
•
•
•
•
•
Reset Function (XAO Signal)
LCD Discharge Function
Overvoltage Protection
Overcurrent Protection
Thermal Shutdown
•
2.5V to 6.0V Input Voltage Range
•
Up to 18V Boost Converter With 4A Switch
Current
•
630kHz/1.2MHz Selectable Switching
Frequency
32-Pin 5*5mm QFN Package
•
•
Adjustable Soft-Start for the Boost Converter
Gate Driver for External Input-to-Output
Isolation Switch
APPLICATIONS
•
Monitor
•
0.5% Accuracy Voltage Regulator for Gamma
Buffer
•
TV (5V Input Voltage)
•
•
Gate Voltage Shaping
VCOM Buffer
DESCRIPTION
The TPS65148 offers a very compact power supply solution designed to supply the LCD bias voltages required
by TFT (Thin Film Transistor) LCD panels running from a typical 5 V supply rail. The device integrates a high
power step-up converter for VS (Source Driver voltage), a very accurate voltage rail using an integrated LDO to
supply the Gamma Buffer (VREG_O) and a Vcom buffer driving the LCD backplane. In addition to that, a gate
voltage shaping block is integrated. The VGH signal (Gate Driver High voltage) supplied by an external positive
charge pump, is modulated into VGHM with high flexibility by using a logic input VFLK and an external discharge
resistor connected to RE pin. Also, an external negative charge pump can be set using the boost converter of the
TPS65148 to generate VGL (Gate Driver Low voltage). The integrated reset function together with the LCD
discharge function available in the TPS65148 provide the signals enabling the discharge of the LCD TFT pixels
when powering-off. The device includes safety features like overcurrent protection (OCP) and short-circuit
protection (SCP) achieved by an external input-to-output isolation switch, as well as overvoltage protection (OVP)
and thermal shutdown.
Space between text and graphic
VIN
5V
Boost Converter
-
(Over Voltage Protection)
VS
13.6 V/500 mA
-
(High Voltage Stress)
Gate Driver for Input-to-output
GD
Isolation Switch
Gate Voltage
Shaping
VGHM
24 V/20mA
&
LCD Discharge
Voltage Regulator for
Gamma
VREG_O
12.5 V/30 mA
VCOM Buffer
(unity gain)
VOPO
130mA
XAO
Reset Function
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009, Texas Instruments Incorporated