TPS62692, TPS62693
TPS62694, TPS62698
CSP-6
www.ti.com
SLVSAZ1 –DECEMBER 2012
800-mA , 3-MHz HIGH-EFFICIENCY STEP-DOWN CONVERTER
Check for Samples: TPS62692, TPS62693, TPS62694, TPS62698
1
FEATURES
DESCRIPTION
The TPS62693 device is
synchronous step-down dc-dc converter optimized for
battery-powered portable applications. Intended for
low-power applications, the TPS62693 supports up to
800-mA load current, and allows the use of low cost
chip inductor and capacitors.
23
•
95% Efficiency at 3MHz Operation
21 μA Quiescent Current
a
high-frequency
•
•
•
•
•
•
•
•
•
•
•
3 MHz Regulated Frequency Operation
Spread Spectrum, PWM Frequency Dithering
High Duty-Cycle Operation
±2% Total DC Voltage Accuracy
Best in Class Load and Line Transient
Excellent AC Load Regulation
The device is ideal for mobile phones and similar
portable applications powered by a single-cell Li-Ion
battery. Different fixed output voltage versions are
available in the range from 2.2 V up to 3.3 V.
Low Ripple Light-Load PFM Mode
≥40 dB VIN PSRR (1 kHz to 10 kHz)
Internal Soft Start, 350-μs Start-Up Time
The TPS62693 operates at a regulated 3-MHz
switching frequency and enters the power-save mode
operation at light load currents to maintain high
efficiency over the entire load current range.
Integrated Active Power-Down Sequencing
(Optional)
The PFM mode extends the battery life by reducing
the quiescent current to 21 μA (typical) during light
load operation. For noise-sensitive applications, the
device can be forced into fixed frequency PWM mode
by pulling the MODE pin high. This feature, combined
with high PSRR and AC load regulation performance,
make this device suitable to replace a linear regulator
to obtain better power conversion efficiency.
•
•
Current Overload and Thermal Shutdown
Protection
Three Surface-Mount External Components
Required (One 2012 MLCC Inductor, Two 0402
Ceramic Capacitors)
•
Complete Sub 1-mm Component Profile
Solution
Total Solution Size <12 mm2 (CSP)
•
•
Available in a 6-Pin NanoFree™ (CSP)
APPLICATIONS
100
90
80
70
60
50
40
30
•
•
•
•
Memory Cards
LDO Replacement
Cell Phones, Smart-Phones
WLAN, Bluetooth™ Applications
V
V
TPS62693
IN
3.15 V ... 4.8 V
OUT
2.85 V @ 800mA
L
SW
VIN
1.0 mH
20
VIN = 3.0V
VIN = 3.6V
VIN = 4.2V
VIN = 3.6V (PWM)
C
I
FB
EN
C
O
2.2 mF
10
4.7 mF
VOUT = 2.85V
GND
MODE
0
0.1
1
10
100 1000
Current (mA)
G000
Figure 1. Smallest Solution Size Application
Figure 2. Efficiency vs. Load Current
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
NanoFree is a trademark of Texas Instruments.
2
3
Bluetooth is a trademark of Bluetooth SIG.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated