TPS62650
TPS62651
CSP-9
www.ti.com ................................................................................................................................................................................................. SLVS808–AUGUST 2009
800-mA, 6-MHz HIGH-EFFICIENCY STEP-DOWN CONVERTER
WITH I2CTM COMPATIBLE INTERFACE IN CHIP SCALE PACKAGING
1
FEATURES
2
•
•
•
•
•
•
•
•
•
•
•
•
86% Efficiency at 6 MHz Operation
DESCRIPTION
38µA Quiescent Current
The TPS6265x device is
a
high-frequency
Wide VIN Range From 2.3 V to 5.5 V
6MHz Regulated Frequency Operation
Best-In-Class Load and Line Transient
±2% PWM DC Voltage Accuracy
synchronous step-down dc-dc converter optimized for
battery-powered portable applications. Intended for
low-power applications, the TPS6265x supports up to
800mA load current and allows the use of small, low
cost inductors and capacitors.
Automatic PFM/PWM Mode Switching
Low Ripple Light-Load PFM
I2C Compatible Interface up to 3.4 Mbps
Pin-Selectable Output Voltage (VSEL)
Internal Soft-Start, <150-µs Start-Up Time
The device is ideal for mobile phones and similar
portable applications powered by a single-cell Li-Ion
battery. With an output voltage range adjustable via
I2C interface down to 0.75V, the device supports
low-voltage DSPs and processors core power
supplies in smart-phones and handheld computers.
Current Overload and Thermal Shutdown
Protection
The TPS6265x operates at
a regulated 6MHz
switching frequency and enters the efficiency
optimized power-save mode operation at light load
currents to maintain high efficiency over the entire
load current range. In the shutdown mode, the
current consumption is reduced to less than 3.5µA.
•
•
Three Surface-Mount External Components
Required (One MLCC Inductor, Two Ceramic
Capacitors)
Complete Sub 1-mm Component Profile
Solution
Total Solution Size <13mm2
The serial interface is compatible with Standard,
Fast/Fast Plus and High-Speed mode I2C
specification allowing transfers at up to 3.4 Mbps.
This communication interface is used for dynamic
voltage scaling with voltage steps down to 12.5mV,
for setting the output voltage or reprogramming the
mode of operation (PFM/PWM or Forced PWM) for
instance.
•
•
Available in a 9-Pin NanoFree™ (CSP)
Packaging
APPLICATIONS
•
•
•
•
SmartReflex™ Compliant Power Supply
OMAP™ Application Processor Core Supply
Cell Phones, Smart-Phones
The TPS6265x is available in an 9-pin chip-scale
package (CSP).
Micro DC-DC Converter Modules
100
VI = 2.7V
V
= 1.2V
O
PFM/PWM Operation
TPS62650
90
80
70
60
50
VIN
V
FB
I
V
O
C1
SW
L1
0.47mH
C2
4.7mF
2.3 V .. 5.5 V
4.7mF
VI = 3.6V
PFM/PWM Operation
GND
40
30
20
10
0
EN
VI = 3.6V
VI = 4.2V
V
= Roof
O
Forced PWM Operation
PFM/PWM Operation
VSEL
V
= Floor
2
O
SDA
SCL
I C Bus
0.1
1
10
100
1000
up to 3.4 Mbips
I
− Load Current − mA
O
Figure 1. Typical Application
Figure 2. Efficiency vs Load Control
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
NanoFree, SmartReflex, OMAP are trademarks of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009, Texas Instruments Incorporated