Support &
Community
Product
Folder
Order
Now
Tools &
Software
Technical
Documents
TPS62400-Q1, TPS62402-Q1, TPS62404-Q1, TPS62405-Q1
SLVSA67F –FEBRUARY 2010–REVISED APRIL 2020
TPS6240x-Q1 2.25-MHz 400-mA and 600-mA Dual Step-Down Converter
1 Features
3 Description
The TPS6240x-Q1 family of devices are synchronous
dual step-down DC-DC converters optimized for
battery-powered portable applications and automotive
systems. They provide two independent output
voltage rails powered by rechargeable batteries or
standard 3.3-V or 5-V voltage rail.
1
•
Qualified for automotive applications
•
AEC-Q100 qualified with the following results:
–
Device temperature grade 1: –40°C to 125°C
operating junction temperature range
–
–
Device HBM ESD classification level H2
Device CDM ESD classification level C4B
The EasyScale™ serial interface allows output-
voltages modification during operation. The fixed-
output-voltage versions, TPS62402-Q1,
TPS62404-Q1, and TPS62405-Q1 support one-pin-
controlled simple dynamic voltage scaling for low-
power processors.
•
•
•
•
•
•
High efficiency—up to 95%
VIN Range from 2.5 V to 6 V
2.25-MHz Fixed-frequency operation
Output current 400 mA and 600 mA
Adjustable output voltage from 0.6 V to VIN
The TPS6240x-Q1 operates at 2.25-MHz fixed
switching frequency and enters the power-save mode
operation at light load currents to maintain high
efficiency over the entire load-current range. For low-
noise applications, one can force the devices into
fixed-frequency PWM mode by pulling the
MODE/DATA pin high. The shutdown mode reduces
the current consumption to 1.2-μA, typical. The
devices allow the use of small inductors and
capacitors to achieve a small solution size.
Pin selectable output voltage supports simple
dynamic voltage scaling
•
•
•
•
•
EasyScale™ optional one-pin serial interface
Power-save mode at light load currents
180° Out-of-phase operation
Output-voltage accuracy in PWM mode ±1%
Typical 32-μA quiescent current for both
converters
(1)
Device Information
•
100% Duty cycle for lowest dropout
PART NUMBER
TPS62400-Q1
TPS62402-Q1
TPS62404-Q1
TPS62405-Q1
PACKAGE
BODY SIZE (NOM)
2 Applications
•
•
Infotainment and cluster
ADAS
VSON (10)
3.00 mm × 3.00 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Simplified Schematic
TPS62402-Q1
TPS62402-Q1 Efficiency versus Output Current,
VOUT1 and VOUT2
100
VIN 2.5 V to 6 V
FB1
VIN
VIN = 3.7 V
2.2 µH
VOUT1 = 1.2 V
400 mA
VIN = 4.2 V
SW1
10 µF
90
VOUT2 = 3.3 V
MODE/DATA = Low
80
10 µF
DEF_1
70
60
EN1
EN2
VIN = 3.7 V
50
VIN = 4.2 V
2.2 µH
VOUT1 = 1.2 V
VOUT2 = 3.3 V
600 mA
40
MODE/DATA = Low
SW2
VIN = 3.7 V
VIN = 4.2 V
30
VOUT2 = 1.2 V
VIN = 3.7 V
MODE/
DATA
MODE/DATA = High
VIN = 4.2 V
10 µF
20
V
OUT2 = 3.3 V
ADJ2
GND
MODE/DATA = High
10
0
0.01
0.1
1
10
100
1000
Output Current (mA)
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. UNLESS OTHERWISE NOTED, this document contains PRODUCTION
DATA.