TPS62350
TPS62351
CSP-12
QFN-10
www.ti.com
SLVS540–MAY 2006
800-mA, 3-MHz SYNCHRONOUS STEP-DOWN CONVERTER
WITH I2C™ COMPATIBLE INTERFACE IN CHIP SCALE PACKAGING
FEATURES
DESCRIPTION
•
•
•
•
•
•
•
•
88% Efficiency at 3-MHz Operation
800-mA Output Current at VI = 2.7 V
3-MHz Fixed Frequency Operation
Best in Class Load and Line Transient
Complete 1-mm Component Profile Solution
±2.0% PWM DC Voltage Accuracy
35-ns Minimum On-Time
The TPS6235x device is
a
high-frequency
synchronous step-down dc-dc converter optimized
for battery-powered portable applications. Intended
for low-power applications, the TPS6235x supports
up to 800-mA load current and allows the use of
small, low cost inductors and capacitors.
The device is ideal for mobile phones and similar
portable applications powered by a single-cell Li-Ion
battery. With an output voltage range adjustable via
I2C interface down to 0.6 V, the device supports
low-voltage DSPs and processors core power
supplies in smart-phones, PDAs, and handheld
computers.
Efficiency Optimized Power-Save Mode
(Light PFM)
•
Transient Optimized Power-Save Mode
(Fast PFM)
•
•
•
•
28-µA Typical Quiescent Current
I2C Compatible Interface up to 3.4 Mbps
Pin-Selectable Output Voltage
The TPS6235x operates at 3-MHz fixed switching
frequency and enters the efficiency optimized
power-save mode operation at light load currents to
maintain high efficiency over the entire load current
range. In the shutdown mode, the current
consumption is reduced to less than 2 µA.
Synchronizable On the Fly to External
Clock Signal
•
Available in a 10-Pin QFN (3 x 3 mm) and
12-Pin NanoFree™ (CSP) Packaging
The serial interface is compatible with Fast/Standard
and High-Speed mode I2C specification allowing
transfers at up to 3.4 Mbps. This communication
interface is used for dynamic voltage scaling with
voltage steps down to 12.5 mV, for reprogramming
the mode of operation (Light PFM, Fast PFM or
Forced PWM) or disable/enabling the output voltage.
APPLICATIONS
•
•
SmartReflex™ Compliant Power Supply
Split Supply DSPs and µP Solutions
OMAP™, XSCALE™
•
•
•
•
Cell Phones, Smart-Phones
PDAs, Pocket PCs
Digital Cameras
Micro DC-DC Converter Modules
EFFICIENCY vs LOAD CURRENT
TYPICAL APPLICATION
100
90
TPS62350YZG
PVIN
V
FB
I
80
V
O
AVIN
C1
SW
70
L1
PGND
C2
10 mF
2.7 V .. 6 V
1 mH
60
50
40
30
20
10
0
PGND
A
AGND
A
EN
V
= Roof
O
V
= 3.6 V
VSEL
I
V
= Floor
O
V
= 1.35 V
O
SDA
2
I C Bus
LPFM/PWM Mode
0.1 10
− Load Current − mA
SCL
up to 3.4 Mbips
1
100 1000
SYNC
I
O
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
NanoFree, SmartReflex, OMAP, PowerPAD are trademarks of Texas Instruments.
XSCALE is a trademark of Intel Corporation.
I2C is a trademark of Philips Corporation.
PRODUCT PREVIEW information concerns products in the
formative or design phase of development. Characteristic data and
other specifications are design goals. Texas Instruments reserves
the right to change or discontinue these products without notice.
Copyright © 2006, Texas Instruments Incorporated