TPS62270, TPS62272
TPS62273
www.ti.com ........................................................................................................................................... SLVS799C–NOVEMBER 2007–REVISED JANUARY 2009
2.25 MHz 400-mA Step Down Converter With Selectable VOUT
1
FEATURES
DESCRIPTION
2
•
•
•
High Efficiency Step Down Converter
Output Current up to 400 mA
The TPS62270 device is
a
high efficiency
synchronous step down DC-DC converter optimized
for battery powered portable applications. It provides
up to 400 mA output current from a single Li-Ion cell.
VIN Range From 2V to 6V for Li-Ion Batteries
With Extended Voltage Range
•
•
•
•
2.25 MHz Fixed Frequency Operation
Pin-Selectable Fixed Output Voltage
Power Save Mode for Highest Efficiency
With an input voltage range of 2 V to 6 V the device
supports Li-Ion batteries with extended voltage range,
and is ideal to power portable applications like mobile
phones and other portable equipment.
Automatic transition between PFM and PWM
Mode
The TPS62270 operates at 2.25 MHz fixed switching
frequency and enters Power Save Mode operation at
light load currents to maintain high efficiency over the
entire load current range. The Power Save Mode is
optimized for low output voltage ripple.
•
•
•
•
•
Voltage Positioning in PFM Mode
Typical 15-µA Quiescent Current
100% Duty Cycle for Lowest Dropout
Available in 2×2×0,8 mm SON Package
Allows <1 mm Solution Height
With the VSEL pin, two different fixed output voltages
can be selected. This function features a dynamic
voltage scaling for low power processor cores.
APPLICATIONS
In the shutdown mode, the current consumption is
reduced to less than 1µA. TPS62270 allows the use
of small inductors and capacitors to achieve a small
solution size.
•
•
•
•
•
•
Low Power Processor Supply
Cell Phones, Smart-phones
Navigation Systems
Low Power DSP Supply
Portable Media Players
Digital Cameras
The TPS62270 is available in a 2 mm × 2 mm, 6-pin
SON package.
VOUT
TPS62270DRV
VIN = 2 V to 6 V
COUT
L
2.2 mH
VOUT
0.9 V / 1.15 V
up to 400 mA
VIN
SW
VIN
CIN
CIN
EN
COUT
4.7 mF
L1
10 mF
FB
U1
GND
1.15 V
VSEL
0.9 V
Total area
21.5 mm²
GND
6.5 mm
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
PowerPad is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2009, Texas Instruments Incorporated