Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
TPS61280, TPS61281, TPS61282
SLVSBI1A –OCTOBER 2013–REVISED SEPTEMBER 2014
TPS6128x Low-, Wide- Voltage Battery Front-End DC/DC Converter
Single-Cell Li-Ion, Ni-Rich, Si-Anode Applications
1 Features
3 Description
The TPS6128x device provides a power supply
solution for products powered by either by a Li-Ion,
Nickel-Rich, Silicon Anode, Li-Ion or LiFePO4 battery.
The voltage range is optimized for single-cell portable
applications like in smart-phones or tablet PCs.
1
•
•
95% Efficiency at 2.3MHz Operation
2µA Quiescent Current in Low IQ Pass-Through
Mode
•
•
•
•
Wide VIN Range From 2.3V to 4.8V
IOUT ≥ 4A (Peak) at VOUT = 3.35V, VIN ≥ 2.65V
Used as a high-power pre-regulator, the TPS6128x
extends the battery run-time and overcomes input
current- and voltage limitations of the powered
system.
Integrated Pass-Through Mode (35mΩ)
Programmable Valley Inductor Current Limit and
Output Voltage
While in shutdown, the TPS6128x operates in a true
pass-through mode with only 2µA quiescent
consumption for longest battery shelf life.
•
Programmable Average Input Current Limit and
Output Voltage
•
•
•
•
True Pass-Through Mode During Shutdown
Best-in-Class Line and Load Transient
Low-Ripple Light-Load PFM Mode
In-Situ Customization with On-Chip E2PROM
(Write Protect)
During operation, when the battery is at a good state-
of-charge, a low-ohmic, high-efficient integrated pass-
through path connects the battery to the powered
system.
If the battery gets to a lower state of charge and its
voltage becomes lower than the desired minimum
system voltage, the device seamlessly transits into
boost mode to utilize the full battery capacity.
•
Two Interface Options:
–
–
I2C Compatible I/F up to 3.4Mbps (TPS61280)
Simple I/O Logic Control Interface (TPS6128x)
•
•
Thermal Shutdown and Overload Protection
Total Solution Size <20mm2, Sub 1-mm Profile
Device Information(1)
PART NUMBER
TPS61280
PACKAGE
BODY SIZE (NOM)
2 Applications
TPS61281
DSBGA (16)
1.66 mm x 1.66 mm
•
Single-Cell Ni-Rich, Si-Anode, Li-Ion, LiFePO4
Smart-Phones or Tablet PCs
TPS61282
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
•
•
2.5G/3G/4G Mini-Module Data Cards
Current Limited Applications Featuring High Peak
Power Loads
4
Simplified Schematic
TPS61280
SW
VOUT
VBAT’
L
SW
VIN
VIN
VOUT
0.47 μH
CO (x2)
10µF X5R 6.3V (0603)
Battery
2.5V .. 4.35V
CI
1.5µF X5R 6.3V (0402)
Voltage Select
Enable
VSEL
EN
1.8V
Forced Bypass / Auto
BYP
SCL
I2C Bus
Interrupt
SDA
GPIO
PGND
PGND
PGND
AGND
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.