Support &
Community
Product
Folder
Order
Now
Tools &
Software
Technical
Documents
TPS61099
SLVSD88K –JULY 2016–REVISED MAY 2018
TPS61099x Synchronous Boost Converter with Ultra-Low Quiescent Current
The TPS61099x boost converter uses a hysteretic
control topology to obtain maximal efficiency at
minimal quiescent current. It only consumes 1-µA
quiescent current under light load condition and can
achieve up to 75% efficiency at 10-µA load with fixed
output voltage version. It can also support up to 300-
mA output current from 3.3 V to 5 V conversion, and
achieve up to 93% at 200-mA load.
1 Features
1
•
•
•
•
•
•
•
•
•
600 nA Ultra-Low IQ into VOUT Pin
400 nA Ultra-Low IQ into VIN Pin
Operating Input Voltage from 0.7 V to 5.5 V
Adjustable Output Voltage from 1.8 V to 5.5 V
Fixed Output Voltage Versions Available
Minimum 0.8 A Switch Peak Current Limit
Regulated Output Voltage in Down Mode
True Disconnection During Shutdown
The TPS61099x also offers both Down Mode and
Pass-Through operations for different applications. In
Down Mode, the output voltage can still be regulated
at target value even when input voltage is higher than
output voltage. In Pass-Through Mode, the output
voltage follows input voltage. The TPS61099x exits
Down Mode and enters into Pass-Through Mode
when VIN > VOUT + 0.5 V.
Up to 75% Efficiency at 10 µA Load with Fixed
Output Voltage Versions
•
•
Up to 93% Efficiency from 10 mA to 300 mA Load
6-Ball 1.23 mm x 0.88 mm WCSP package and 2-
mm x 2-mm WSON package
The TPS61099x supports true shutdown function
when it is disabled, which disconnects the load from
the input supply to reduce the current consumption.
•
Create a Custom Design Using the TPS61099x
With the WEBENCH® Power Designer
The TPS61099x offers both adjustable output voltage
version and fixed output voltage versions. It is
2 Applications
available in 6-ball 1.23-mm
Package and 6-pin 2-mm x 2-mm WSON package .
x 0.88-mm WCSP
•
•
•
•
•
•
Memory LCD Bias
Optical Heart Rate Monitor LED Bias
Wearable Applications
Device Information(1)
Low Power Wireless Applications
Portable Products
PART NUMBER
TPS61099
PACKAGE
BODY SIZE (NOM)
WCSP (6)
1.23 mm x 0.88 mm
Battery Powered Systems
TPS61099x
TPS61099
WSON(6)
2 mm x 2 mm
3 Description
TPS61099x
The TPS61099x device is a synchronous boost
converter with 1-µA ultra-low quiescent current. The
device is designed for products powered by an
alkaline battery, NiMH rechargeable battery, Li-Mn
battery or rechargeable Li-Ion battery, for which high
efficiency under light load condition is critical to
achieve long battery life operation.
(1) For all available packages, see the orderable addendum at
the end of this document.
Typical Application Circuit
1.8 V to 5.5 V
VOUT
L1
SW
VOUT
FB
2.2 µH
C2
C3
R1
R2
VIN
VIN TPS61099
10 µF 10 µF
0.7 V to 5.5 V
C1
10 µF
EN
GND
Copyright © 2016, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.