TPS54311, TPS54312
TPS54313, TPS54314
TPS54315, TPS54316
Typical Size
6,60 mm X 2,20 mm
SLVS416 – FEBRUARY 2002
3-V TO 6-V INPUT, 3-A OUTPUT SYNCHRONOUS-BUCK PWM
SWITCHER WITH INTEGRATED FETs (SWIFT )
FEATURES
DESCRIPTION
D
D
D
60-mΩ MOSFET Switches for High Efficiency
at 3-A Continuous Output Source or Sink
Current
As members of the SWIFT family of dc/dc regulators,
the TPS54311, TPS54312, TPS54313, TPS54314,
TPS54315 and TPS54316 low-input-voltage high-
output-current synchronous-buck PWM converters
integrate all required active components. Included on
the substrate with the listed features are a true, high
performance, voltage error amplifier that provides fast
response under transient conditions; an undervoltage-
lockout circuit to prevent start-up until the input voltage
reaches 3 V; an internally and externally set slow-start
circuit to limit in-rush currents; and a power good output
useful for processor/logic reset, fault signaling and
supply sequencing.
0.9-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V and 3.3-V Fixed
Output Voltage Devices With 1% Initial
Accuracy
Internally Compensated for Ease of Use and
Minimal Component Count
D
Fast Transient Response
D
Wide PWM Frequency—Fixed 350 kHz,
550 kHz or Adjustable 280 kHz to 700 kHz
D
D
Load Protected by Peak Current Limit and
Thermal Shutdown
The TPS54311-6 devices are available in a thermally
enhanced 20-pin TSSOP (PWP) PowerPAD
package, which eliminates bulky heatsinks. TI provides
evaluationmodulesandtheSWIFT designersoftware
tool to aid in quickly achieving high-performance power
supply designs to meet aggressive equipment
development cycles.
Integrated Solution Reduces Board Area and
Total Cost
APPLICATIONS
D
D
Low-Voltage, High-Density Systems With
Power Distributed at 5 V or 3.3 V
Point of Load Regulation for
High-Performance DSPs, FPGAs, ASICs, and
Microprocessors
EFFICIENCY
vs
LOAD CURRENT
100
D
D
Broadband, Networking, and Optical
Communications Infrastructure
90
80
70
Portable Computing/Notebook PCs
Simplified Schematic
Input
Output
VIN
PH
TPS54316
V = 5 V
60
50
I
V
= 3.3 V
O
BOOT
PGND
f = 350 kHz
0
0.5
1
1.5
2
2.5
3
3.5
VBIAS
VSENSE
Load Current – A
GND
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
SWIFT and PowerPAD are trademarks of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright 2002, Texas Instruments Incorporated
1
www.ti.com