TPS40200-EP
www.ti.com
SGLS371–JANUARY 2007
WIDE-INPUT-RANGE NONSYNCHRONOUS VOLTAGE-MODE CONTROLLER
FEATURES
•
Programmable Fixed-Frequency (35 kHz to
500 kHz) Operation
•
Controlled Baseline
•
•
•
•
•
•
Programmable Short-Circuit Protection
Hiccup Overcurrent Fault Recovery
Programmable Closed-Loop Soft Start
700-mV 1% Reference Voltage
–
One Assembly/Test Site, One Fabrication
Site
•
•
Extended Temperature Performance of –55°C
to 125°C
Enhanced Diminishing Manufacturing Sources
(DMS) Support
External Synchronization
Small 8-Pin Small-Outline Integrated Circuit
(SOIC) (D) Package
•
•
•
•
•
•
•
Enhanced Product-Change Notification
(1)
Qualification Pedigree
APPLICATIONS
Input Voltage Range 4.5 V to 52 V
Output Voltage (700 mV to 87% Vin)
200-mA Internal P-Channel FET Driver
Voltage Feed-Forward Compensation
Undervoltage Lockout
•
•
•
•
•
Industrial Control
Distributed Power Systems
DSL/Cable Modems
Scanners
Telecom
(1) Component qualification in accordance with JEDEC and
industry standards to ensure reliable operation over an
extended temperature range. This includes, but is not limited
to, Highly Accelerated Stress Test (HAST) or biased 85/85,
temperature cycle, autoclave or unbiased HAST,
electromigration, bond intermetallic life, and mold compound
life. Such qualification testing should not be viewed as
justifying use of this component beyond specified
performance and environmental limits.
DESCRIPTION
The TPS40200 is a flexible nonsynchronous controller with a built-in 200-mA driver for P-channel FETs. The
circuit operates with inputs up to 52 V, with a power-saving feature that turns off driver current once the external
FET has been fully turned on. This feature extends the flexibility of the device, allowing it to operate with an
input voltage up to 52 V, without dissipating excessive power. The circuit operates with voltage-mode feedback
and has feed-forward input-voltage compensation that responds instantly to input-voltage change. The integral
700-mV reference is trimmed to 2%, providing the means to accurately control low voltages. The TPS40200 is
available in an 8-pin SOIC, and supports many of the features of more complex controllers. Clock frequency,
soft start, and overcurrent limit each are easily programmed by a single, external component. The part has
undervoltage lockout, and can be easily synchronized to other controllers or a system clock to satisfy
sequencing and/or noise-reduction requirements.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2007, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.