TPS38
SNVSBJ2 – APRIL 2022
TPS38 Wide VIN 65 V Dual Channel Overvoltage or Undervoltage (OV or UV) Detector
with Programmable Sense and Reset Function
1 Features
3 Description
•
Functional Safety-Capable
The TPS38 is a 65 V input voltage detector with
1 μA IDD, 1% accuracy, and with a fast 10 μs detection
time. This device can be connected directly to 12
V / 24 V automotive battery system for continuous
monitoring of over (OV) or under (UV) voltage
conditions; with its internal resistor divider, it offers the
smallest total solution size. Wide hysteresis voltage
options are available to ignore cold crank, start-stop
and various car battery voltage transients. Built-in
hysteresis on the SENSE pins prevents false reset
signals when monitoring a supply voltage rail.
– Documentation available to aid functional safety
system design
•
•
•
•
Wide supply voltage range: 2.7 V to 65 V
SENSE and RESET pins are 65 V graded
Low quiescent current: 1 μA (typical)
Flexible and wide voltage threshold options
Table 12-1
– 2.7 V to 36 V (1.5% maximum accuracy)
– 800 mV option (1% maximum accuracy)
Built-in hysteresis (VHYS)
•
– Percentage options: 2% to 13% (1% steps)
– Fixed options: VTH < 8 V = 0.5 V, 1 V, 1.5 V,
2 V, 2.5 V
Programmable reset time delay
– 10 nF = 12.8 ms, 10 μF = 12.8 s
Programmable sense time delay
– 10 nF = 1.28 ms, 10 μF = 1.28 s
Manual Reset (MR) feature
Output reset latching feature
Output topology:
– Channel 1: Open-Drain or Push-Pull
– Channel 2: Open-Drain
The separate VDD and SENSE pins allow for
the redundancy sought by high-reliability automotive
systems and SENSE can monitor higher and lower
voltages than VDD. Optional use of external resistors
are supported by the high impedance input of the
SENSE pins. CTSx and CTRx pins allow delay
adjustability on the rising and falling edges of the
RESET signals. Also, CTSx functions as a debouncer
by ignoring voltage glitches on the monitored voltage
rails; CTRx operates as a manual reset (MR) that can
be used to force a system reset.
•
•
•
•
•
The TPS38 is available in a WSON or SOT-23
package. The central pad is non-conductive to
increase the creepage between VDD and GND per
guidelines in IEC60664. TPS38 operates over –40°C
to +125°C TA.
2 Applications
•
•
•
•
•
•
Gateway
PLC
I/O Module
Servo/AC Motor Control
Factory Automation
Power Tools
Device Information
PART NUMBER
TPS38
PACKAGE (1)
WSON (10) (DSK)
SOT-23 (14) (DYY) (2)
BODY SIZE (NOM)
2.5 mm × 2.5 mm
4.1 mm × 1.9 mm
TPS38
(1) For package details, see the mechanical drawing addendum
at the end of the data sheet.
(2) Product Preview
0.95
0.90
0.85
0.80
0.75
0.70
0.65
Typical Application Circuit
Low Iq, No external
resistors needed
DC/DC
Ba ery
MCU
VDD
VDD
GPIO
MCU Flag
RESET1
SENSE1
TPS38
0.60
GND
-40oC
RESET2
SENSE2
25oC
0.55
0.50
GND
125oC
Enable
Boost
0
5
10 15 20 25 30 35 40 45 50 55 60 65
Supply Voltage (V)
Backup
Vba
Boost
Converter
Typical IDD vs VDD
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.