data sheet
TPS2375
TPS2376
TPS2377
D−8
PW−8
www.ti.com............................................................................................................................................................ SLVS525B–APRIL 2004–REVISED APRIL 2008
IEEE 802.3af PoE POWERED DEVICE CONTROLLERS
1
FEATURES
APPLICATIONS
•
•
•
•
•
VoIP Phones
•
•
•
•
•
•
•
•
•
•
•
Fully Supports IEEE 802.3af Specification
Integrated 0.58-Ω, 100-V, Low-Side Switch
15-kV System Level ESD Capable
Supports Use of Low-Cost Silicon Rectifiers
Programmable Inrush Current Control
Fixed 450-mA Current Limit
WLAN Access Points
Security Cameras
Internet Appliances
POS Terminals
TPS2376
TPS2375/77
(TOP VIEW)
(TOP VIEW)
Fixed and Adjustable UVLO Options
Open-Drain, Power-Good Reporting
Overtemperature Protection
1
2
8
7
6
5
1
2
8
7
6
5
VDD
VDD
N/C
ILIM
ILIM
CLASS
DET
CLASS
DET
UVLO
3
4
3
4
PG
PG
RTN
RTN
VSS
VSS
Industrial Temperature Range: -40°C to 85°C
8-Pin SOIC and TSSOP Packages
DESCRIPTION
These easy-to-use 8-pin integrated circuits contain all of the features needed to develop an IEEE 802.3af
compliant powered device (PD). The TPS2375 family is a second generation PDC (PD Controller) featuring
100-V ratings and a true open-drain, power-good function.
In addition to the basic functions of detection, classification and undervoltage lockout (UVLO), these controllers
include an adjustable inrush limiting feature. The TPS2375 has 802.3af compliant UVLO limits, the TPS2377 has
legacy UVLO limits, and the TPS2376 has a programmable UVLO with a dedicated input pin.
The TPS2375 family specifications incorporate a voltage offset of 1.5 V between its limits and the IEEE 802.3af
specifications to accommodate the required input diode bridges used to make the PD polarity insensitive.
Additional resources can be found on the TI Web site www.ti.com.
RJ−45
1
TX
Pair
Detect
Classify
Power Up & Inrush
Data to
Ethernet
PHY
2
Class 3
Current
Input
Current
DF01S
2 Places
R
100
kW
(DET)
24.9 kW,
V
(PG-RTN)
1 %
PG
DET
ILIM
R
(ILIM)
4
5
0.1mF,
100 V
10 %
178 kW,
1 %
V
100 mF,
100 V
DD
Spare
Pair
CLASS
V
RTN
7
8
RTN
R
(ICLASS)
357 W,
1 %
Spare
Pair
3
Note: Class 3 PD Depicted.
PG Pullup Resistor Is Optional.
Note: All Voltages With Respect to VSS.
RX
Pair
Data to
Ethernet PHY
6
Figure 1. Typical Application Circuit and Startup Waveforms
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2004–2008, Texas Instruments Incorporated