TPA6141A2
www.ti.com .................................................................................................................................................................................................. SLOS634–MARCH 2009
CLASS-G DIRECTPATH™ STEREO HEADPHONE AMPLIFIER
1
FEATURES
DESCRIPTION
2
•
TI Class-G Technology Significantly Prolongs
Battery Life and Music Playback Time
The TPA6141A2 (also known as TPA6141) is a
Class-G DirectPath™ stereo headphone amplifier
with selectable gain. Class-G technology maximizes
battery life by adjusting the voltage supplies of the
headphone amplifier based on the audio signal level.
At low level audio signals, the internal supply voltage
is reduced to minimize power dissipation.
–
–
0.6 mA / Ch Quiescent Current
50% to 80% Lower Quiescent Current Than
Ground-Referenced Class-AB Headphone
Amplifiers
DirectPathTM
DC-blocking capacitors.
technology
eliminates
external
•
DirectPathTM Technology Eliminates Large
Output DC-Blocking Capacitors
–
–
Outputs Biased at 0 V
The device operates from a 2.5 V to 5.5 V supply
voltage. Class-G operation keeps total supply current
below 5.0 mA while delivering 500 µW per channel
into 32 Ω. Shutdown mode reduces the supply
current to less than 3 µA and is activated through the
EN pin.
Improves Low Frequency Audio Fidelity
•
•
Active Click and Pop Suppression
Fully Differential Inputs Reduce System Noise
–
Also Configurable as Single-Ended Inputs
•
•
•
•
•
•
•
•
SGND Pin Eliminates Ground Loop Noise
Wide Power Supply Range: 2.5 V to 5.5 V
100 dB Power Supply Noise Rejection
Gain Settings: 0 dB and 6dB
The device has built-in pop suppression circuitry to
completely eliminate disturbing pop noise during
turn-on and turn-off. The amplifier outputs have
short-circuit and thermal-overload protection along
with ±8 kV HBM ESD protection, simplifying end
equipment compliance to the IEC 61000-4-2 ESD
standard.
Short-Circuit Current Limiter
Thermal-Overload Protection
The TPA6141A2 (TPA6141) is available in a 0,4 mm
pitch, 16-bump 1,6 mm × 1,6 mm WCSP (YFF)
package.
±8 kV HBM ESD Protected Outputs
0,4 mm Pitch, 1,6 mm × 1,6 mm WCSP
Package
1 mF
APPLICATIONS
OUTR+
OUTR-
OUTL+
OUTL-
INR+
INR-
INL+
INL-
•
•
•
Cellular Phones / Music Phones
Portable Media / MP3 Players
Portable CD / DVD Players
OUTR
OUTL
CODEC
TPA6141A2
SGND
AGND
EN
EN
GAIN
GAIN
AVDD
Vbat
SW
HPVSS
CPN
2.2 mH
2.2 mF
HPVDD
2.2 mF
CPP
1 mF
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
Class-G DirectPath, DirectPath are trademarks of Texas Instruments.
PRODUCT PREVIEW information concerns products in the
formative or design phase of development. Characteristic data and
other specifications are design goals. Texas Instruments reserves
the right to change or discontinue these products without notice.
Copyright © 2009, Texas Instruments Incorporated