5秒后页面跳转
TPA0312PWPG4 PDF预览

TPA0312PWPG4

更新时间: 2024-11-25 14:45:15
品牌 Logo 应用领域
德州仪器 - TI 光电二极管商用集成电路
页数 文件大小 规格书
37页 899K
描述
2 CHANNEL(S), VOLUME CONTROL CIRCUIT, PDSO24, GREEN, PLASTIC, HTSSOP-24

TPA0312PWPG4 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Obsolete零件包装代码:TSSOP
包装说明:HTSSOP, TSSOP24,.25针数:24
Reach Compliance Code:unknownECCN代码:EAR99
HTS代码:8542.39.00.01风险等级:5.53
商用集成电路类型:VOLUME CONTROL CIRCUIT谐波失真:1%
JESD-30 代码:R-PDSO-G24JESD-609代码:e4
长度:7.8 mm湿度敏感等级:2
频带数量:1信道数量:2
功能数量:1端子数量:24
最高工作温度:85 °C最低工作温度:-40 °C
封装主体材料:PLASTIC/EPOXY封装代码:HTSSOP
封装等效代码:TSSOP24,.25封装形状:RECTANGULAR
封装形式:SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH峰值回流温度(摄氏度):260
电源:5 V认证状态:Not Qualified
座面最大高度:1.2 mm子类别:Audio/Video Amplifiers
最大压摆率:10 mA最大供电电压 (Vsup):5.5 V
最小供电电压 (Vsup):4.5 V表面贴装:YES
技术:CMOS温度等级:INDUSTRIAL
端子面层:Nickel/Palladium/Gold (Ni/Pd/Au)端子形式:GULL WING
端子节距:0.65 mm端子位置:DUAL
处于峰值回流温度下的最长时间:NOT SPECIFIED宽度:4.4 mm
Base Number Matches:1

TPA0312PWPG4 数据手册

 浏览型号TPA0312PWPG4的Datasheet PDF文件第2页浏览型号TPA0312PWPG4的Datasheet PDF文件第3页浏览型号TPA0312PWPG4的Datasheet PDF文件第4页浏览型号TPA0312PWPG4的Datasheet PDF文件第5页浏览型号TPA0312PWPG4的Datasheet PDF文件第6页浏览型号TPA0312PWPG4的Datasheet PDF文件第7页 
TPA0312  
www.ti.com  
SLOS335ADECEMBER 2000REVISED OCTOBER 2004  
2.6-W STEREO AUDIO POWER AMPLIFIER WITH FOUR  
SELECTABLE GAIN SETTINGS AND MUX CONTROL  
FEATURES  
PWP PACKAGE  
Compatible With PC 99 Desktop Line-Out Into  
(TOP VIEW)  
10-kLoad  
1
24  
23  
22  
21  
20  
19  
18  
17  
16  
15  
14  
13  
GND  
GAIN0  
GAIN1  
LOUT+  
LLINEIN  
LHPIN  
GND  
Internal Gain Control, Which Eliminates  
External Gain-Setting Resistors  
2
RLINEIN  
SHUTDOWN  
ROUT+  
RHPIN  
3
2.6-W/Ch Output Power Into 3-Load  
Input MUX Select Terminal  
PC-Beep Input  
4
5
6
V
DD  
7
PV  
PV  
DD  
DD  
Depop Circuitry  
8
RIN  
LOUT–  
LIN  
BYPASS  
GND  
HP/LINE  
ROUT–  
SE/BTL  
PC-BEEP  
GND  
Stereo Input MUX  
9
10  
11  
12  
Fully Differential Input  
Low Supply Current and Shutdown Current  
Surface-Mount Power Packaging 24-Pin  
TSSOP PowerPAD™  
DESCRIPTION  
The TPA0312 is a stereo audio power amplifier in a 24-pin TSSOP thermally enhanced package capable of  
delivering 2.6 W of continuous RMS power per channel into 3-loads. This device minimizes the number of  
external components needed, simplifying the design, and freeing up board space for other features. When driving  
1 W into 8-speakers, the TPA0312 has less than 0.65% THD+N across its specified frequency range. Included  
within this device is integrated depop circuitry that virtually eliminates transients that cause noise in the speakers.  
Amplifier gain is internally configured and controlled by way of two terminals (GAIN0 and GAIN1). BTL gain  
settings of 6 dB, 10 dB, 15.6 dB, and 21.6 dB (inverting) are provided, whereas SE gain is always configured as  
4.1 dB for headphone drive. An internal input MUX allows two sets of stereo inputs to the amplifier. The HP/LINE  
terminal allows the user to select which MUX input is active, regardless of whether the amplifier is in SE or BTL  
mode. In notebook applications, where internal speakers are driven as BTL and the line outputs (often  
headphone drive) are required to be SE, the TPA0312 automatically switches into SE mode when the SE/BTL  
input is activated, and this reduces the gain to 4.1 dB.  
The TPA0312 consumes only 6 mA of supply current during normal operation. A miserly shutdown mode  
reduces the supply current to 150 µA.  
The PowerPAD™ package (PWP) delivers a level of thermal performance that was previously achievable only in  
TO-220-type packages. Thermal impedances of approximately 35°C/W are readily realized in multilayer PCB  
applications. This allows the TPA0312 to operate at full power into 8-loads at an ambient temperature of 85°C.  
AVAILABLE OPTIONS  
PACKAGED DEVICE  
TSSOP(1) (PWP)  
TA  
–40°C to 85°C  
TPA0312PWP  
(1) The PWP package is available taped and reeled. To order a taped  
and reeled part, add the suffix R to the part number (e.g.,  
TPA0312PWPR).  
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas  
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
PowerPAD is a trademark of Texas Instruments.  
PRODUCTION DATA information is current as of publication date.  
Copyright © 2000–2004, Texas Instruments Incorporated  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  

TPA0312PWPG4 替代型号

型号 品牌 替代类型 描述 数据表
TPA0312PWPR TI

完全替代

Stereo 2-W Audio Power Amp with 4 Selectable Gain Settings and MUX Control 24-HTSSOP -40 t
TPA0312PWPRG4 TI

完全替代

Stereo 2-W Audio Power Amp with 4 Selectable Gain Settings and MUX Control 24-HTSSOP -40 t
TPA0312PWP TI

完全替代

2.6-W STEREO AUDIO POWER AMPLIFIER WITH FOUR SELECTABLE GAIN SETTINGS AND MUX CONTROL

与TPA0312PWPG4相关器件

型号 品牌 获取价格 描述 数据表
TPA0312PWPR TI

获取价格

Stereo 2-W Audio Power Amp with 4 Selectable Gain Settings and MUX Control 24-HTSSOP -40 t
TPA0312PWPRG4 TI

获取价格

Stereo 2-W Audio Power Amp with 4 Selectable Gain Settings and MUX Control 24-HTSSOP -40 t
TPA032D01 TI

获取价格

10-W MONO CLASS-D AUDIO POWER AMPLIFIER
TPA032D01_07 TI

获取价格

10-W MONO CLASS-D AUDIO POWER AMPLIFIER
TPA032D01DCA TI

获取价格

10-W MONO CLASS-D AUDIO POWER AMPLIFIER
TPA032D01DCAR TI

获取价格

10-W MONO CLASS-D AUDIO POWER AMPLIFIER
TPA032D01DCARG4 TI

获取价格

10-W MONO CLASS-D AUDIO POWER AMPLIFIER
TPA032D02 TI

获取价格

10-W STEREO CLASS-D AUDIO POWER AMPLIFIER
TPA032D02_07 TI

获取价格

10-W STEREO CLASS-D AUDIO POWER AMPLIFIER
TPA032D02DCA TI

获取价格

10-W STEREO CLASS-D AUDIO POWER AMPLIFIER