Datasheet > TMP93PW76F

TMP93PW76F

更新时间： 2024-11-19 22:14:39

品牌	Logo	应用领域
东芝 - TOSHIBA		/
页数	文件大小	规格书
48页	385K
描述
Quality And Reliability Assurance / Handling Precautions

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

TMP93PW76F 技术参数

是否Rohs认证：	不符合	生命周期：	Transferred
零件包装代码：	QFP	包装说明：	14 X 20 MM, 0.65 MM PITCH, PLASTIC, QFP-100
针数：	100	Reach Compliance Code：	unknown
风险等级：	5.5	具有ADC：	YES
其他特性：	ALSO OPERATES AT 2.7V MINIMUM SUPPLY	地址总线宽度：
位大小：	16	最大时钟频率：	16 MHz
DAC 通道：	NO	DMA 通道：	NO
外部数据总线宽度：		JESD-30 代码：	R-PQFP-G100
长度：	20 mm	I/O 线路数量：	85
端子数量：	100	最高工作温度：	70 °C
最低工作温度：	-20 °C	PWM 通道：	YES
封装主体材料：	PLASTIC/EPOXY	封装代码：	QFP
封装形状：	RECTANGULAR	封装形式：	FLATPACK
峰值回流温度（摄氏度）：	NOT SPECIFIED	认证状态：	Not Qualified
ROM可编程性：	OTPROM	座面最大高度：	3.05 mm
速度：	16 MHz	最大供电电压：	5.5 V
最小供电电压：	4.5 V	标称供电电压：	5 V
表面贴装：	YES	技术：	CMOS
温度等级：	COMMERCIAL	端子形式：	GULL WING
端子节距：	0.65 mm	端子位置：	QUAD
处于峰值回流温度下的最长时间：	NOT SPECIFIED	宽度：	14 mm
uPs/uCs/外围集成电路类型：	MICROCONTROLLER	Base Number Matches：	1

TMP93PW76F 数据手册

Quality and Reliability Assurance / Handling Precautions

Quality And Reliability Assurance / Handling Precautions

In recent years, technical revolutions have become almost a daily occurrence in the

electronics industry. This is accompanied by the increasing application of semiconductors in

both the consumer and industrial sectors, and demands for higher quality and higher

reliability.

Toshiba is making every effort to improve both quality and reliability with the following

quality control system which incorporates product design, quality assurance for parts and

materials received, manufacturing process quality assurance, shipping quality and

reliability assurance, and quality after-service based on user demands and market survey

data.

1 Quality And Reliability Assurance

1.1 Quality Assurance

Trying to sense the customer’s needs, we do our best to incorporate the quality and

reliability required by the customer into the design, while considering the safety

and PL (Product Liability) of the products.

Quality and reliability evaluation are performed on the developed products

according to the Toshiba’s reliability test standard which is prepared in conformity

with JIS, EIAJ, MIL, etc., thereby certifying the design. The parts and materials

are standardized through the engineering department and the quality assurance

department. After the design is accepted, standardization is performed by the

engineering department on the parts and materials, process plan, and inspection

plan. Engineering Institution of Works (EW) is then established on the working

detail. The quality and reliability evaluation are performed on the mass-produced

products on an experimental basis.

In the mass production, the production department has control of the

manufacturing process, the environment and facility, and the quality assurance

department. Quality assurance performs incoming inspection of parts and

materials, modification control, instrument control, periodical reliability test and

line audit. The production technology divisions also participate in process

improvement, automatization, etc.

Education and training for quality and reliability, are given to new workers,

inspectors, engineers and small groups (QC/ZD movement). In shipping the

finished products, a lot quality assurance test is performed by the quality assurance

department. We then commence preparation of specifications meeting pre-arranged

quality and reliability standards and the inspection and reports on discrepant

products “quick action” as the motto. Figure 1 shows the quality assurance system

of semiconductor.

030901

QUA-1

2002-02-20

12 3 4 5 6 7...48

中文翻译

下载PDF

与TMP93PW76F相关器件

型号	品牌	获取价格	描述	数据表
TMP94C241C	TOSHIBA	获取价格	CMOS 32-Bit Microcontroller
TMP94C241CF	TOSHIBA	获取价格	Quality And Reliability Assurance / Handling Precautions
TMP94C241CFG	TOSHIBA	获取价格	IC MICROCONTROLLER, PQFP160, 28 X 28 MM, 0.65 MM PITCH, QFP-160, Microcontroller
TMP94C241F	ETC	获取价格	32-Bit Microcontroller
TMP94C251AF	TOSHIBA	获取价格	Quality And Reliability Assurance / Handling Precautions
TMP94C251F	TOSHIBA	获取价格	IC 32-BIT, 20 MHz, MICROCONTROLLER, PQFP144, MINI, QFP-144, Microcontroller
TMP94FD53IF	TOSHIBA	获取价格	IC 32-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100, 14 X 14 MM, 0.50 MM PITCH, PLASTIC, LQ
TMP94FU81F	TOSHIBA	获取价格	Quality And Reliability Assurance / Handling Precautions
TMP95C001	TOSHIBA	获取价格	CMOS 16-BIT MICROCONTROLLER
TMP95C001F	TOSHIBA	获取价格	Quality And Reliability Assurance / Handling Precautions

与TMP93PW76F相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

25
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

17
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

49
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

46

产品中心

服务支持

精选活动

关于我们

帮助中心

TMP93PW76F

TMP93PW76F 技术参数

TMP93PW76F 数据手册

与TMP93PW76F相关器件

与TMP93PW76F相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

TMP93PW76F

TMP93PW76F 技术参数

TMP93PW76F 数据手册

与TMP93PW76F相关器件

与TMP93PW76F相关文章

您还可以找

您在本页遇到什么问题？