TOSHIBA
TLCS-90 Series
TMP90C846
CMOS 8–Bit Microcontroller
TMP90C846F
1. Outline and Characteristics
The TMP90C846 is an advanced 8-bit microcontroller
developed for application in the control of HDD/FDD high-
speed mechanisms. The built-in functions include a high-speed
A/D converter (minimum sampling rate: 400ns @ 10MHz)
with an external start function, and a D/A converter.
The TMP90C846, integrates 8-bit CPU, ROM, RAM,
high-speed A/D converter, D/A converter, and multi-function
timer/event counter in a single-chip.
(4)
(5)
Built-in RAM: 256 bytes
Memory expansion capability
External program memory: 56K bytes
External data memory: 56K bytes
Highly-speed A/D converter (2 channels)
• Minimum sampling rate: 400ns (@ 10MHz)
• 16-byte FIFO RAM (conversion data storage)
• External start, software start (one-time conversion,
repeat conversion
8-bit voltage output type D/A converter (2 channels)
Multi-function 16-bit timer/event counter (1 channel)
8-bit timer (4 channels)
(6)
The TMP90C846 uses a 44-pin mini flat package (QFP44-P-
1414D).
The following are the features of the TMP90C846:
(7)
(8)
(9)
(1)
Highly efficient instruction set:
163 basic instructions
(10) Interrupt function: 9 internal, 4 external
(11) Micro DMA function (10 channels)
(12) Watchdog timer function
(13) Zero cross detector (2 pins)
(14) I/O ports (28 pins)
Division and multiplication instructions, 16-bit operation
instruction and bit manipulation operation instructions
and bit operation instructions.
(2)
(3)
Minimum instruction executing time: 400ns (@ 10MHz)
Built-in ROM: 8K bytes
(15) Standby function (4 HALT modes)
The information contained here is subject to change without notice.
The information contained herein is presented only as guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties
which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. These TOSHIBA products are intended for usage in general electronic
equipments (office equipment, communication equipment, measuring equipment, domestic electrification, etc.) Please make sure that you consult with us before you use these TOSHIBA products in equip-
ments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life (atomic energy control, spaceship, traffic signal, combustion control, all types
of safety devices, etc.). TOSHIBA cannot accept liability to any damage which may occur in case these TOSHIBA products were used in the mentioned equipments without prior consultation with TOSHIBA.
TOSHIBA CORPORATION
1/98