TMP86PM29B
CMOS 8-Bit Microcontroller
TMP86PM29BU/BF
The TMP86PM29B is a OTP type MCU which includes 32 Kbyte One-time PROM. It is a pin
compatible with a mask ROM product of the TMP86C829B/H29B/M29B. Writing the program to
built-in PROM, the TMP86PM29B operates as the same way as the TMP86C829B/H29B/M29B.
Also, this product has upper compatibility for TMP86CH21 and TMP86C420/820 and can be used as
an one-time PROM for these products. Please refer to detail “Functional differences of product
basis”. Using the Adapter socket, you can write and verify the data for the TMP86PM29B with a
general-purpose PROM programmer same as TC571000D/AD.
Product No.
TMP86PM29BU
TMP86PM29BF
OTP
RAM
Package
P-LQFP64-1010-0.50
P-QFP64-1414-0.80A
Adapter Socket
BM11162
32 K uꢀ8-bit
1.5 K uꢀ8 bit
BM11163
P-LQFP64-1010-0.50
TMP86PM29BU
P-QFP64-1414-0.80A
TMP86PM29BF
030619EBP1
• The information contained herein is subject to change without notice.
• The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by
implication or otherwise under any patent or patent rights of TOSHIBA or others.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can
malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when
utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations
in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most
recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for
Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc..
• The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal
equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are
neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunctionor
failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control
instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at
the customer’s own risk.
• The products described in this document are subject to the foreign exchange and foreign trade laws.
• TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law
and regulations.
• For a discussion of how the reliability of microcontrollers can be predicted, please refer to Section 1.3 of the chapter entitled Quality and
Reliability Assurance/Handling Precautions.
86PM29B-1
2003-07-03