Under development
TMP86FM48
CMOS 8-Bit Microcontroller
TMP86FM48U/F
The TMP86FM48 is the high-speed, high-performance and low power consumption 8-bit
microcomputer, including FLASH, RAM, multi-function timer/counter, serial interface (UART, HSIO,
I2C), a 10-bit AD converter and two clock generators on chip.
FLASH
FLASH
Product No.
RAM
Package
Emulation Chip
(Program Area)
(Data Area)
TMP86FM48U
TMP86FM48F
P-LQFP64-1010-0.50
P-QFP64-1414-0.80A
32256 u 8 bits
512 u 8 bits
2.0 K u 8 bits
*TMP86C948XB
*: Under development
Feautures
P-LQFP64-1010-0.50
i
i
8-bit single chip microcomputer TLCS-870/C series
Instruction execution time: 0.25 Ps (at 16 MHz)
122 Ps (at 32.768 kHz)
i
i
i
i
132 types and 731 basic instructions
20 interrupt sources (External: 5, Internal: 15)
Input/Output ports (54 pins)
TMP86FM48U
16-bit timer counter: 2 ch
xꢀTimer, Event counter,
Pulse width measurement, External trigger timer,
Window, PPG output modes
P-QFP64-1414-0.80A
i
8-bit timer counter: 2 ch
xꢀTimer, Event counter, PWM output,
Programmable divider output, Capture modes
i
i
Time Base Timer
TMP86FM48F
Divider output function
000707EBP1
x For a discussion of how the reliability of microcontrollers can be predicted, please refer to Section 1.3 of the chapter entitled Quality
and Reliability Assurance / Handling Precautions.
x TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general
can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the
buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and
to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or
damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the
most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling
Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc..
x The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal
equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are
neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or
failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy
control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control
instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document
shall be made at the customer’s own risk.
x The products described in this document are subject to the foreign exchange and foreign trade laws.
x The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its
use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or
others.
x The information contained herein is subject to change without notice.
Purchase of TOSHIBA I2C components conveys a license under the Philips I2C Patent Rights to use
these components in an I2C system, provided that the system conforms to the I2C Standard
Specification as defined by Philips.
2003-04-08
86FM48-1