Datasheet > TMP110-Q45-2

TMP110-Q45-2

更新时间： 2024-11-19 06:01:43

品牌	Logo	应用领域
TRUMPOWER		医疗
页数	文件大小	规格书
2页	165K
描述
110 WATT MEDICAL POWER ADAPTERS

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

TMP110-Q45-2 数据手册

TRUMPower

110 WATT MEDICAL POWER ADAPTERS

TMP110 SERIES

DESCRIPTION

(MDD)

The TMP110 series of AC/DC switching power

adapters are for 110 watts of continuous

output power. They are enclosed in a 94V-1

rated polyphenylene-oxide case with an IEC

320 inlet to mate with interchangeable cord for

world-wide use. An on/off switch can be added

at request. All models meet CISPR 11 and FCC

class B emission limits, and are designed for

medical applications.

FEATURES

‧

Dual, triple or quadruple outputs

Optional output connectors

Optional on/off switch

Safety Standard Approvals：

Optional Power Fail Detect (PFD) signal

100% burn-in

UL 2601-1

CSA C22.2 No. 601.1

Wide input range 85 to 264 VAC

Input surge current protection

Overvoltage protection

TÜV EN60601-1

Overcurrent protection

INPUT SPECIFICATIONS

ENVIRONMENTAL SPECIFICATIONS

Input voltage：

85 to 264 VAC

Operating temperature：

Storage temperature：

Relative humidity：

Derating：

0ºC to +70ºC

Input frequency： 47 to 63 Hz

-40ºC to +85ºC

Input current：

3.20A (rms) for 115 VAC

1.80A (rms) for 230VAC

5% to 95% non-condensing

Derate from 100% at +50ºC

linearly to 50% at +70ºC

Leakage current： 90µA max. @ 115VAC, 60Hz

150µA max. @ 230VAC, 50Hz

OUTPUT SPECIFICATIONS

Output voltage/current： See rating chart

GENERAL SPECIFICATIONS

Switching frequency： 20KHz to 250KHz, varies with load and line

Efficiency：

70% minimum on single output models with

Vo ≥12V, 65% minimum on the others

12 msec minimum at 110VAC

Total output power：

Ripple and noise：

110 watts maximum

1% peak to peak maximum

Hold-up time：

Overvoltage protection： Provided on output #1 only;

set at 112-132% of its nominal

Line regulation：

±0.5% maximum at full load

Inrush current：

15 amps @ 115VAC, or 30 amps

@230VAC, at 25ºC cold start

4000VAC from input to output 1500VAC

from input to ground

500VAC from output to ground

550,000 hours minimum at full load at 25ºC

ambient, calculated per MIL-HDBK-217F,

excluding DC fan.

output voltage

Withstand voltage：

Overcurrent protection： All outputs protected to short

circuit conditions

MTBF：

Temperature coefficient： All outputs ±0.04%/ºC

maximum

EMC Performance (EN60601-1-2: 2001)

Transient response：

Maximum excursion of 4% or

better on all models,

recovering to 1% of final

value within 500us after a

25% step load change

EN55011:

FCC:

VCCI:

EN61000-3-2:

EN61000-3-3:

EN61000-4-2:

Class B conducted, Class B radiated

Harmonic distortion, Class A

Line flicker

ESD, ±8KV air and ±6KV contact

PFD signal (optional):

TTL logic high for normal

operation and TTL logic low

upon loss of input power. This

signal appears at least 1ms

prior to +5V output dropping

5% below its nominal value.

This signal also provides a

minimum delay of 100ms after

+5V is within regulation.

EN61000-4-3:

EN61000-4-4:

EN61000-4-5:

EN61000-4-6:

EN61000-4-8:

EN61000-4-11:

Radiated immunity, 3V/m for 80~2500MHz

Fast transient/burst, ±2KV

Surge, ±1KV diff, ±2KV com.

Conducted immunity, 3Vrms

Magnetic field immunity, 3A/m

Voltage dips, 30% reduction for 500ms, 60%

reduction for 100ms and >95% reduction for

10ms

Tumbler Technologies + TRUMPower

3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA

Phone: 408-988-6616 ● Fax: 408-988-6622 ● email: sales@trumpower.com ● Website: www.TRUMPower.com

中文翻译

下载PDF

与TMP110-Q45-2相关器件

型号	品牌	获取价格	描述	数据表
TMP110-Q46	TRUMPOWER	获取价格	110 WATT MEDICAL POWER ADAPTERS
TMP110-T31	TRUMPOWER	获取价格	110 WATT MEDICAL POWER ADAPTERS
TMP110-T32	TRUMPOWER	获取价格	110 WATT MEDICAL POWER ADAPTERS
TMP112	TI	获取价格	High-Accuracy, Low-Power, Digital Temperature
TMP112_1	TI	获取价格	High-Accuracy, Low-Power, Digital Temperature
TMP112AIDRLR	TI	获取价格	High-Accuracy, Low-Power, Digital Temperature
TMP112AIDRLR	UMW	获取价格	温度感应器
TMP112AIDRLT	TI	获取价格	High-Accuracy, Low-Power, Digital Temperature
TMP112AQDRLRQ1	TI	获取价格	采用 2.56mm2 封装、具有 I2C/SMBus 的汽车类 ±0.5°C 1.4V 至
TMP112BIDRLR	TI	获取价格	采用 2.56mm2 封装、具有 I2C/SMBus 的 ±0.5°C 1.4V 至 3.

与TMP110-Q45-2相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

22
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

14
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

44
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

43

产品中心

服务支持

精选活动

关于我们

帮助中心

TMP110-Q45-2

TMP110-Q45-2 数据手册

与TMP110-Q45-2相关器件

与TMP110-Q45-2相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

TMP110-Q45-2

TMP110-Q45-2 数据手册

与TMP110-Q45-2相关器件

与TMP110-Q45-2相关文章

您还可以找

您在本页遇到什么问题？