APPLICABLE STANDARD
OPERATING
STORAGE
-55 C TO 85 C
125 V AC
-25 C TO 60 C
TEMPERATURE RANGE
TEMPERATURE RANGE
OPERATING HUMIDITY
RANGE
RATING
VOLTAGE
85%RH MAX
1
CURRENT
500 mA
APPLICABLE CABLE
-
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
X
X
X
X
MARKING
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE
100 mA (DC OR 1000 Hz).
230 m MAX.
X
X
MEASUREMENT POINT
100 mm
PLUG
MODULAR CABLE
RECEPTACLE
(ONE EXAMPLE OF CONNECTOR CONFIGURATION
IS SHOW N.)
100 V DC.
INSULATION RESISTANCE
VOLTAGE PROOF
100 M MIN.
X
X
X
X
500 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
MECHANICAL OPERATION
200 TIMES INSERTIONS AND EXTRACTIONS.
① CONTACT RESISTANCE: 250 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
-
X
VIBRATION
SHOCK
FREQUENCY 10 TO 55 Hz, SINGLE AMPLITUDE
0.75 mm, ― m/s2 AT 2 h FOR 3 DIRECTIONS.
490 m/s2 DURATION OF PULSE 11 ms
AT 3 TIMES FOR 3 DIRECTIONS.
① NO ELECTRICAL DISCONTINUITY OF 5 s.
② CONTACT RESISTANCE: 250 m MAX.
③ NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
-
-
X
X
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
EXPOSED AT 40 C, 90 TO 95 , 500 h
① CONTACT RESISTANCE: 250 m MAX.
② INSULATION RESISTANCE:
1 M MIN. (AT HIGH HUMIDITY)
10 M MIN. (AT DRY)
③ NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
-
-
X
(STEADY STATE)
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE -55±3→5 TO 35→85±2→5 TO 35℃
① CONTACT RESISTANCE:
250 m MAX.
X
TIME
30 TO 35→5 MAX→30 TO 35→5 MAX min
② INSULATION RESISTANCE: 100 M MIN.
③ NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
UNDER 5 CYCLES.
CORROSION SALT MIST
EXPOSED IN 5 % SALT WATER SPRAY FOR
48 h.
① CONTACT RESISTANCE:
② NO HEAVY CORROSION.
250 m MAX.
-
-
-
X
X
X
RESISTANCE TO
SOLDERING HEAT
SOLDERABILITY
SOLDER TEMPERATURE, 260 ± 5 ℃ FOR
IMMERSION, DURATION 10 ± 1 S.
SOLDERED AT SOLDER TEMPERATURE, 245 ± 2 ℃
FOR IMMERSION, DURATION 3 ± 1 S.
NO DEFORMATION OF CASE AND EXCESSIVE
LOOSENESS OF THE TERMINALS.
MIN. 95 % OF SOLDER IMMERSED AREA
SHALL BE COVERED NEW SOLDER COATING.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
YK.MORIYAMA
CHECKED
DATE
1
△
1
DIS-E-00011745
KG.OKITA
MN.KENJO
20221121
20201120
20201120
20201120
20201120
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
TU.TANIGUCHI
HY.MATSUDA
Unless otherwise specified, refer to IEC 60512.
DS.HIROWATARI
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-047407-40-00
TM5RL-88(40)
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
1
1/1
CL0222-2665-8-40
△
FORM HD0011-2-1