TLV320DAC3100-Q1
www.ti.com
SLAS896A –JULY 2013–REVISED AUGUST 2013
Low-Power Stereo Audio DAC With Audio Processing
and Mono Class-D Speaker Amplifier
Check for Samples: TLV320DAC3100-Q1
1 INTRODUCTION
1.1 Features
Playback Volume-Control Settings
• Digital Sine-Wave Generator for Beeps and Key
Clicks (PRB_P25)
123
• Qualified for Automotive Applications
• AEC-Q100 Qualified with the Following Results:
• Programmable PLL for Flexible Clock
Generation
– Device Temperature Grade 3: –40°C to 85°C
Ambient Operating Temperature Range
– Device HBM ESD Classification Level H2
– Device CDM ESD Classification Level C4B
• Stereo Audio DAC with 95-dB SNR
• I2S, Left-Justified, Right-Justified, DSP, and
TDM Audio Interfaces
• I2C Control With Register Auto-Increment
• Full Power-Down Control
• Power Supplies:
• Supports 8-kHz to 192-kHz Sample Rates
• Mono Class-D BTL Speaker Driver (2.5 W Into
– Analog: 2.7 V–3.6 V
– Digital Core: 1.65 V–1.95 V
– Digital I/O: 1.1 V–3.6 V
4-Ω or 1.6 W Into 8-Ω)
• Two Single-Ended Inputs With Mixing and
Output Level Control
• Stereo Headphone/Lineout and Mono Class-D
Speaker Outputs Available
– Class-D: 2.7 V–5.5 V (SPKVDD ≥ AVDD)
• 5-mm × 5-mm 32-QFN Package
• Microphone Bias
• Headphone Detection
1.2 Applications
•
•
•
•
Automotive Applications
Portable Audio Devices
Mobile Internet Devices
eBooks
• 25 Built-in Digital Audio Processing Blocks
(PRB_P1 – PRB_P25) Providing Biquad and FIR
Filters, DRC, and 3-D Structures
• Digital Mixing Capability
• Pin Control or Register Control for Digital-
1.3 Description
The TLV320DAC3100-Q1 is a low-power, highly-integrated, high-performance stereo-audio DAC with 24-bit
stereo playback and digital audio processing blocks.
The device integrates headphone drivers and speaker drivers. The mono speaker driver drives loads down to 4
Ω. The TLV320DAC3100-Q1 has a suite of built-in processing blocks for digital audio processing. The digital
audio data format is programmable to work with popular audio standard protocols (I2S, left and right-justified) in
master, slave, DSP, and TDM modes. Bass boost, treble, or EQ is supported by the programmable digital signal-
processing block. An on-chip PLL provides the high-speed clock required by the digital signal-processing block.
The volume level is controlled either by pin control or by register control. The audio functions are controlled using
the I2C serial bus.
The TLV320DAC3100-Q1 has a programmable digital sine-wave generator and is available in a 32-pin QFN
package.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
MATLAB is a trademark of The MathWorks, Inc.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date. Products conform to
specifications per the terms of the Texas Instruments standard warranty. Production
processing does not necessarily include testing of all parameters.
Copyright © 2013, Texas Instruments Incorporated