TLV320AIC22
DUAL VOIP CODEC
SLAS281B – JULY 2000 – REVISED JUNE 2002
Two 16-Bit Analog-to-Digital Converters
(ADC)
Preamplifiers for Microphone, Handset,
Headset, and Speaker Phone Gain
Selectable Via the Serial Port or I C Bus
2
Two 16-Bit Digital-to-Analog Converters
(DAC)
2.5-V Microphone Bias Voltage
Programmable Input/Output Gain
Seamless Interface to a Single Multichannel
Buffered Serial Port (McBSP) of a C54x or a
C6x DSP
Analog Crosspoint to Connect the Two
Coder/Decoders (Codecs) to Any of the I/O
Ports. Controlled Through the Serial Port or
Four TLV320AIC22 ICs Can Be Cascaded
Together to Allow up to Eight Channels
2
the I C Bus
8-Bit A-Law/µ-Law Companded Data or
16-Bit Linear Data Complying With G.711
Standard
2s-Complement Data Format
Differential Outputs
Typical Low Crosstalk < –85 dB
(Interchannel)
Programmable ADC and DAC Conversion
Rate
Hardware/Software Power Down
Independent Power Down for Drivers
Single 3.3-V Supply Operation
Typical 77-dB Signal-to-Noise + Distortion
for ADC
Typical 78-dB Signal-to-Noise + Distortion
for the DAC
120-mW Typical Power Consumption
Packaged in 48-Pin Low-Profile Quad
Flatpack (LQFP) Package
Typical 80-dB Dynamic Range
All Typical Sampling Rates, Such as 7.2, 8,
8.229, 9.6, 10.285, 12, 14.4, and 16 kHz
Supported
description
The TLV320AIC22 is a dual coder/decoder (codec) for voice applications, including voice-over-internet protocol
(VOIP). It features two ADC conversion channels and two DAC conversion channels that can be connected to
a handset, headset, speaker, microphone, or a subscriber line via an analog crosspoint.
The TLV320AIC22 has a flexible serial interface that allows the two channels of the TLV320AIC22 to be
interfaced to a single multichannel buffered serial port (McBSP) of the DSP. The two channels share the digital
interface at different time slots. Up to four TLV320AIC22 units can be cascaded together to allow eight channels.
2
For control purposes, either the serial interface or the I C interface can be used. Programmable gain amplifiers,
preamplifier gain, microphone bias voltages, and analog crosspoint are programmed through the serial
2
interface or the I C interface. The TLV320AIC22 can be powered down, via a dedicated pin or by using software
control, to reduce power dissipation.
The TLV320AIC22isavailableina48-pinLQFPpackageandischaracterizedforoperationfrom–40°Cto85°C.
ORDERING INFORMATION
PACKAGE
T
A
PLASTIC QUAD FLATPACK
(PT)
–40°C to 85°C
TLV320AIC22PT
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2002, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265