TLV2556-EP
www.ti.com ................................................................................................................................................... SLAS598A–NOVEMBER 2008–REVISED JULY 2009
12-BIT 200-KSPS 11-CHANNEL LOW-POWER SERIAL ANALOG-TO-DIGITAL CONVERTER
WITH INTERNAL REFERENCE
1
FEATURES
PW AND DW PACKAGE
•
12-Bit-Resolution Analog-to-Digital Converter
(ADC)
(TOP VIEW)
•
Up to 200-KSPS (150-KSPS for 3 V)
Throughput Bit With 12-Output Mode Over
Operating Temperature Range
AIN0
AIN1
AIN2
AIN3
AIN4
AIN5
AIN6
AIN7
AIN8
GND
V
CC
1
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
13
12
11
INT/EOC
I/O CLOCK
DATA IN
DATA OUT
CS
•
•
•
11 Analog Input Channels
3 Built-In Self-Test Modes
Programmable Reference (2.048 V/4.096 V
Internal or External)
REF+
REF−
•
•
•
•
Inherent Sample and Hold Function
Linearity Error...±1 LSB Max
On-Chip Conversion Clock
AIN10
AIN9
Programmable Conversion Status Output: INT
or EOC
DESCRIPTION
The TLV2556 is
a
12-bit, switched-capacitor,
•
•
•
•
•
Unipolar or Bipolar Output Operation
Programmable MSB or LSB First
Programmable Power Down
successive-approximation, analog-to-digital converter
(ADC). The ADC has three control inputs [chip select
(CS), the input-output clock, and the address/control
input (DATAIN)], designed for communication with the
serial port of a host processor or peripheral through a
serial 3-state output.
Programmable Output Data Length
SPI Compatible Serial Interface With I/O Clock
Frequencies up to 15 MHz (CPOL = 0,
CPHA = 0)
In addition to the high-speed converter and versatile
control capability, the device has an on-chip
14-channel multiplexer that can select any one of 11
inputs or any one of three internal self-test voltages
using configuration register 1. The sample-and-hold
function is automatic. At the end of conversion, when
programmed as EOC, the pin 19 output goes high to
indicate that conversion is complete. If pin 19 is
programmed as INT, the signal goes low when the
conversion is complete. The converter incorporated in
the device features differential, high-impedance
reference inputs that facilitate ratiometric conversion,
scaling, and isolation of analog circuitry from logic
and supply noise. A switched-capacitor design allows
low-error conversion over the full operating
temperature range. An internal reference is available
and its voltage level is programmable via
configuration register 2 (CFGR2).
SUPPORTS DEFENSE, AEROSPACE,
AND MEDICAL APPLICATIONS
•
•
•
•
Controlled Baseline
One Assembly/Test Site
One Fabrication Site
Available in Military (–55°C/125°C)
Temperature Range(1)
Extended Product Life Cycle
Extended Product-Change Notification
Product Traceability
•
•
•
APPLICATIONS
•
•
•
•
Industrial Process Control
Portable Data Logging
Battery Powered Instruments
Automotive
(1) Additional temperature ranges are available - contact factory
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2008–2009, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.