TLE4275-Q1
5-V LOW-DROPOUT VOLTAGE REGULATOR
www.ti.com
SLVS647–AUGUST 2006
FEATURES
KTT PACKAGE
(TOP VIEW)
•
•
•
•
•
•
•
•
•
Qualified for Automotive Applications
Output Voltage 5 V ± 2%
OUT
5
4
3
2
1
Very Low Current Consumption
Power-On and Undervoltage Reset
Reset Low-Level Output Voltage < 1 V
Very Low Dropout Voltage
Short-Circuit Proof
DELAY
GND
RESET
IN
Reverse-Polarity Proof
ESD Protection > 6 kV
DESCRIPTION/ORDERING INFORMATION
The TLE4275 is a monolithic integrated low-dropout voltage regulator offered in a 5-pin TO package. An input
voltage up to 45 V is regulated to VOUT = 5 V (typ). The device can drive loads up to 450 mA and is short-circuit
proof. At overtemperature, the TLE4275 is turned off by the incorporated temperature protection. A reset signal
is generated for an output voltage, VOUT,rt, of 4.65 V (typ). The reset delay time can be programmed by the
external delay capacitor.
The input capacitor, CIN, compensates for line fluctuation. Using a resistor of approximately 1 Ω, in series with
CIN, dampens the oscillation of input inductivity and input capacitance. The output capacitor, COUT, stabilizes the
regulation circuit. Stability is specified at COUT ≥ 22 µF and ESR ≤ 5 Ω, within the operating temperature range.
The control amplifier compares a reference voltage to a voltage that is proportional to the output voltage and
drives the base of the series transistor via a buffer. Saturation control as a function of the load current prevents
any oversaturation of the power element. The device also incorporates a number of internal circuits for
protection against:
•
•
•
Overload
Overtemperature
Reverse polarity
ORDERING INFORMATION
TJ
PACKAGE(1)
ORDERABLE PART NUMBER
TLE4275QKTTRQ1
TOP-SIDE MARKING
–40°C to 150°C
TO-263 – KTT
Reel of 500
TLE4275Q1
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
TERMINAL FUNCTIONS
NO.
1
NAME
IN
DESCRIPTION
Input. Connect to ground as close to device as possible, through a ceramic capacitor.
Reset output. Open-collector output.
2
RESET
GND
3
Ground. Internally connected to heatsink.
4
DELAY
OUT
Reset delay. Connect to ground with a capacitor to set delay time.
Output. Connect to ground with ≥22-µF capacitor, ESR < 5 Ω at 10 kHz.
5
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006, Texas Instruments Incorporated