5秒后页面跳转
TLC2554IPW PDF预览

TLC2554IPW

更新时间: 2024-11-22 22:35:39
品牌 Logo 应用领域
德州仪器 - TI 转换器
页数 文件大小 规格书
37页 566K
描述
5-V, 12-BIT, 400 KSPS, 4/8 CHANNEL, LOW POWER, SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH AUTO POWER DOWN

TLC2554IPW 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:TSSOP
包装说明:TSSOP, TSSOP16,.25针数:16
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.39.00.01Factory Lead Time:1 week
风险等级:1.62最大模拟输入电压:5.5 V
最小模拟输入电压:最长转换时间:2.5 µs
转换器类型:ADC, SUCCESSIVE APPROXIMATIONJESD-30 代码:R-PDSO-G16
JESD-609代码:e4长度:5 mm
最大线性误差 (EL):0.0244%湿度敏感等级:1
模拟输入通道数量:4位数:12
功能数量:1端子数量:16
最高工作温度:85 °C最低工作温度:-40 °C
输出位码:BINARY, 2'S COMPLEMENT BINARY输出格式:SERIAL
封装主体材料:PLASTIC/EPOXY封装代码:TSSOP
封装等效代码:TSSOP16,.25封装形状:RECTANGULAR
封装形式:SMALL OUTLINE, THIN PROFILE, SHRINK PITCH峰值回流温度(摄氏度):260
电源:5 V认证状态:Not Qualified
采样速率:0.4 MHz采样并保持/跟踪并保持:SAMPLE
座面最大高度:1.2 mm子类别:Analog to Digital Converters
最大压摆率:6 mA最小供电电压:4.5 V
标称供电电压:5 V表面贴装:YES
技术:CMOS温度等级:INDUSTRIAL
端子面层:Nickel/Palladium/Gold (Ni/Pd/Au)端子形式:GULL WING
端子节距:0.65 mm端子位置:DUAL
处于峰值回流温度下的最长时间:NOT SPECIFIED宽度:4.4 mm

TLC2554IPW 数据手册

 浏览型号TLC2554IPW的Datasheet PDF文件第2页浏览型号TLC2554IPW的Datasheet PDF文件第3页浏览型号TLC2554IPW的Datasheet PDF文件第4页浏览型号TLC2554IPW的Datasheet PDF文件第5页浏览型号TLC2554IPW的Datasheet PDF文件第6页浏览型号TLC2554IPW的Datasheet PDF文件第7页 
TLC2554, TLC2558  
5-V, 12-BIT, 400 KSPS, 4/8 CHANNEL, LOW POWER,  
SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH AUTO POWER DOWN  
SLAS220A –JUNE 1999  
Maximum Throughput 400 KSPS  
Analog Input Range 0 V to Supply Voltage  
With 500 kHz BW  
Built-In Reference and 8× FIFO  
Hardware Controlled and Programmable  
Sampling Period  
Differential/Integral Nonlinearity Error:  
±1 LSB  
Low Operating Current (4 mA at 5.5 V  
External Ref, 6 mA at 5.5 V, Internal Ref)  
Signal-to-Noise and Distortion Ratio:  
69 dB, f = 12 kHz  
i
Power Down: Software/Hardware  
Power-Down Mode (1 µA Max, Ext Ref),  
Auto Power-Down Mode (1 µA, Ext Ref)  
Spurious Free Dynamic Range: 75 dB,  
f = 12 kHz  
i
SPI/DSP-Compatible Serial Interfaces With  
SCLK up to 20 MHz  
Programmable Auto-Channel Sweep  
Single Supply 5 Vdc  
D OR PW PACKAGE  
(TOP VIEW)  
DW OR PW PACKAGE  
(TOP VIEW)  
1
2
3
4
5
6
7
8
9
10  
20 CS  
SDO  
SDI  
CS  
SDO  
SDI  
1
2
3
4
5
6
7
8
16  
15  
14  
13  
12  
11  
19  
18  
17  
16  
15  
14  
13  
12  
11  
REFP  
REFM  
FS  
REFP  
REFM  
FS  
SCLK  
SCLK  
EOC/(INT)  
EOC/(INT)  
V
PWDN  
GND  
V
PWDN  
GND  
CSTART  
A7  
CC  
CC  
A0  
A1  
A2  
A0  
A1  
A2  
A3  
A4  
10 CSTART  
A3  
9
A6  
A5  
description  
The TLC2558 and TLC2554 are a family of high-performance, 12-bit low power, 1.6 µs, CMOS analog-to-digital  
converters (ADC) which operate from a single 5 V power supply. These devices have three digital inputs and  
a 3-state output [chip select (CS), serial input-output clock (SCLK), serial data input (SDI), and serial data output  
(SDO)] that provide a direct 4-wire interface to the serial port of most popular host microprocessors (SPI  
interface). When interfaced with a DSP, a frame sync (FS) signal is used to indicate the start of a serial data  
frame.  
In addition to a high-speed A/D converter and versatile control capability, these devices have an on-chip analog  
multiplexer that can select any analog inputs or one of three internal self-test voltages. The sample-and-hold  
function is automatically started after the fourth SCLK edge (normal sampling) or can be controlled by a special  
pin, CSTART, to extend the sampling period (extended sampling). The normal sampling period can also be  
programmed as short (12 SCLKs) or as long (24 SCLKs) to accommodate faster SCLK operation popular  
among high-performance signal processors. The TLC2558 and TLC2554 are designed to operate with very low  
power consumption. The power-saving feature is further enhanced with software/hardware/auto power down  
modes and programmable conversion speeds. The converter uses the external SCLK as the source of the  
conversion clock to achieve higher (up to 1.6 µs when a 20 MHz SCLK is used) conversion speed. There is a  
4-V internal reference available. An optional external reference can also be used to achieve maximum flexibility.  
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
Copyright 1999, Texas Instruments Incorporated  
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of Texas Instruments  
standard warranty. Production processing does not necessarily include  
testing of all parameters.  
1
POST OFFICE BOX 655303 DALLAS, TEXAS 75265  

与TLC2554IPW相关器件

型号 品牌 获取价格 描述 数据表
TLC2554IPWG4 TI

获取价格

4-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO16, GREEN, PLASTIC, TSSOP-16
TLC2554IPWR TI

获取价格

4-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO16, GREEN, PLASTIC, TSSOP-16
TLC2554IPWRG4 TI

获取价格

4-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO16, GREEN, PLASTIC, TSSOP-16
TLC2554QD TI

获取价格

12-bit, 400 KSPS ADC, 4-Ch. Serial With Powerdown 16-SOIC -40 to 125
TLC2554QDR TI

获取价格

暂无描述
TLC2555 TI

获取价格

5 V, LOW POWER, 12-BIT, 400 KSPS, SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH AUTOPOWER DOWN
TLC2555CDGK TI

获取价格

5 V, LOW POWER, 12-BIT, 400 KSPS, SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH AUTOPOWER DOWN
TLC2555CDGKR TI

获取价格

暂无描述
TLC2555CDGKRG4 TI

获取价格

1-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO8, PLASTIC, MSOP-8
TLC2555ID TI

获取价格

5 V, LOW POWER, 12-BIT, 400 KSPS, SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH AUTOPOWER DOWN