TL851

更新时间： 2024-11-22 22:19:35

品牌	Logo	应用领域
德州仪器 - TI		/
页数	文件大小	规格书
6页	84K
描述
SONAR RANGING CONTROL

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

TL851 数据手册

TL851

SONAR RANGING CONTROL

SLSS004 – SEPTEMBER 1983 – REVISED MARCH 1988

N PACKAGE

(TOP VIEW)

Designed for Use With the TL852 in Sonar

Ranging Modules Like the SN28827

Operates With Single Supply

BLNK

BINH

INIT

Accurate Clock Output for External Use

Synchronous 4-Bit Gain Control Output

Internal 1.2-V Level Detector for Receive

TTL-Compatible

XMIT

GND

GCD

GCA

GCB

GCC

REC

FILT

XTAL2

XTAL1

OSC

Interfaces to Electrostatic or Piezoelectric

Transducers

ECHO

description

The TL851 is an economical digital I L ranging control integrated circuit designed for use with the Texas

Instruments TL852 sonar ranging receiver integrated circuit.

TheTL851isdesignedfordistancemeasurementfromsixinchesto35feet. Thedevicehasaninternaloscillator

that uses a low-cost external ceramic resonator. With a simple interface and a 420-kHz ceramic resonator, the

device will drive a 50-kHz electrostatic transducer.

The device cycle begins when Initiate (INIT) is taken to the high logic level. There must be at least 5 ms from

initial power-up (V ) to the first initiate signal in order for all the device internal latches to reset and for the

ceramic-resonator-controlled oscillator to stabilize. The device will transmit a burst of 16 pulses each time INIT

is taken high.

The oscillator output (OSC) is enabled by INIT. The oscillator frequency is the ceramic resonator frequency

divided by 8.5 for the first 16 cycles (during transmit) and then the oscillator frequency changes to the ceramic

resonator frequency divided by 4.5 for the remainder of the device cycle.

When used with an external 420-kHz ceramic resonator, the device internal blanking disables the receive input

(REC) for 3.8 ms after initiate to exclude false receive inputs that may be caused by transducer ringing. The

internal blanking feature also eliminates echos from objects closer than 1.3 feet from the transducer. If it is

necessary to detect objects closer than 1.3 feet, then the internal blanking may be shortened by taking the

blanking inhibit (BINH) high, enabling the receive input. The blanking input (BLNK) may be used to disable the

receive input and reset ECHO to a low logic level at any time during the device cycle for selective echo exclusion

or for a multiple-echo mode of operation.

The device provides a synchronous 4-bit gain control output (12 steps) designed to control the gain of the TL852

sonar ranging receiver integrated circuit. The digital gain control waveforms are shown in Figure 2 with the

nominal transition times from INIT listed in the Gain Control Output Table.

The threshold of the internal receive level detector is 1.2 V. The TL851 operates over a supply voltage range

of 4.5 V to 6.8 V and is characterized for operation from 0°C to 40°C.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

12 3 4 5 6

中文翻译

下载PDF

与TL851相关器件

型号	品牌	获取价格	描述	数据表
TL851CD	TI	获取价格	SONAR RANGING CONTROL
TL851CDG4	TI	获取价格	SONAR RANGING CONTROL
TL851CDR	TI	获取价格	SONAR RANGING CONTROL
TL851CDRG4	TI	获取价格	SONAR RANGING CONTROL
TL851CN	TI	获取价格	SONAR RANGING CONTROL
TL851CNE4	TI	获取价格	SONAR RANGING CONTROL
TL851N	TI	获取价格	SONAR RANGING CONTROL
TL852	TI	获取价格	SONAR RANGING RECEIVER
TL852_12	TI	获取价格	SONAR RANGING RECEIVER
TL852CDR	TI	获取价格	SONAR RANGING RECEIVER

与TL851相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

35
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

26
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

54
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

52

产品中心

服务支持

精选活动

关于我们

帮助中心

TL851

TL851 数据手册

与TL851相关器件

与TL851相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

TL851

TL851 数据手册

与TL851相关器件

与TL851相关文章

您还可以找

您在本页遇到什么问题？