TL783
HIGH-VOLTAGE ADJUSTABLE REGULATOR
SLVS036E – SEPTEMBER 1981 – REVISED FEBRUARY 2000
KC PACKAGE
(TOP VIEW)
Output Adjustable From 1.25 V to 125 V
When Used With an External Resistor
Divider
IN
OUT
ADJ
700-mA Output Current
Full Short-Circuit, Safe-Operating-Area, and
Thermal-Shutdown Protection
The OUT terminal is in electrical
contact with the mounting base.
0.001%/V Typical Input Voltage Regulation
0.15% Typical Output Voltage Regulation
76-dB Typical Ripple Rejection
TO-220AB
I
O
A
Standard TO-220AB Package
description
The TL783 is an adjustable three-terminal
high-voltage regulator with an output range of
1.25 V to 125 V and a DMOS output transistor
capable of sourcing more than 700 mA. It is
designed for use in high-voltage applications where standard bipolar regulators cannot be used. Excellent
performance specifications, superior to those of most bipolar regulators, are achieved through circuit design
and advanced layout techniques.
As a state-of-the-art regulator, the TL783 combines standard bipolar circuitry with high-voltage double-diffused
MOS transistors on one chip to yield a device capable of withstanding voltages far higher than standard bipolar
integrated circuits. Because of its lack of secondary-breakdown and thermal-runaway characteristics usually
associated with bipolar outputs, the TL783 maintains full overload protection while operating at up to 125 V from
input to output. Other features of the device include current limiting, safe-operating-area (SOA) protection, and
thermal shutdown. Even if ADJ is inadvertently disconnected, the protection circuitry remains functional.
Only two external resistors are required to program the output voltage. An input bypass capacitor is necessary
only when the regulator is situated far from the input filter. An output capacitor, although not required, improves
transient response and protection from instantaneous output short circuits. Excellent ripple rejection can be
achieved without a bypass capacitor at the adjustment terminal.
The TL783C is characterized for operation over the virtual junction temperature range of 0°C to 125°C.
AVAILABLE OPTIONS
PACKAGED DEVICE
CHIP
HEAT-SINK
MOUNTED
(KC)
FORM
(Y)
T
J
0°C to 125°C
TL783CKC
TL783Y
Chip forms are tested at 25°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2000, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265