TL5209
500-mA LOW-NOISE LOW-DROPOUT VOLTAGE REGULATOR
WITH SHUTDOWN
www.ti.com
SLVS581A–SEPTEMBER 2006–REVISED MAY 2007
FEATURES
•
•
•
•
Adjustable Output Voltage
•
•
•
•
Current Limiting and Thermal Protection
Stable With Minimum Load of 1 mA
Reverse-Battery Protection
Applications
1%/2% Accuracy (25°C/Full Range)
500-mV (Max) Dropout at Full Load of 500 mA
Extremely Tight Regulation Over Temperature
Range
–
Portable Applications (PDAs, Laptops,
Cell Phones)
–
–
0.1%/V (Max) Line Regulation
0.7% (Max) Load Regulation
–
–
Consumer Electronics
•
•
•
Ultra-Low Noise Capability (300 nV/√Hz Typ)
Shutdown Current of 3 µA (Max)
Low Temperature Coefficient
Post-Regulation for SMPS
•
Available in Convenient SOIC-8
Surface-Mount Package
D PACKAGE
(TOP VIEW)
1
2
3
4
8
7
6
5
EN
GND
GND
GND
GND
IN
OUT
ADJ/BYP
DESCRIPTION/ORDERING INFORMATION
The TL5209 is an efficient PNP low-dropout (LDO) regulator that is well suited for portable applications. It has
significantly lower quiescent current than previously was available from traditional PNP regulators and allows for
a shutdown current of only 0.05 µA (typical). The TL5209 also has very good dropout voltage characteristics,
requiring a maximum dropout of 60 mV at light loads and 500 mV at full load. In addition, the LDO also has 1%
output voltage accuracy and extremely tight line and load regulation that is hard to match by its CMOS
counterparts.
For noise-sensitive applications, the TL5209 allows for low-noise capability via an external bypass capacitor
connected to the BYP pin, which reduces the output noise of the regulator. Other features include current
limiting, thermal shutdown, reverse-battery protection, and low temperature coefficient.
The TL5209 is available with adjustable output. Offered in an SOIC-8 surface-mount package, the TL5209 is
characterized for operation over the virtual junction temperature ranges of –40°C to 125°C.
ORDERING INFORMATION(1)
TJ
PACKAGE(2)
ORDERABLE PART NUMBER
TOP-SIDE MARKING
–40°C to 125°C
SOIC – D
Reel of 2000
TL5209DR
TL5209
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
(2) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2006–2007, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.