TL3
Vishay Sprague
www.vishay.com
Solid Tantalum Surface Mount Chip Capacitors,
TANTAMOUNT™, Molded Case, Very Low DCL
FEATURES
• DC leakage at 0.005 CV
• Low ESR options
• Qualified to EIA-717
• 100 ꢀ surge current tested
(B, C, D, and E case sizes)
Available
Available
• Improved reliability: 0.50 ꢀ / 1000 h, 85 °C,
rated voltage
• Molded case available in five case codes
Available
•
Terminations: 100 ꢀ matte tin standard,
tin / lead available
• Compliant terminations
• Compatible with “high volume” automatic pick and place
equipment
• Moisture sensitivity level 1
• Standard EIA-535-BAAC case size (A through E)
• Material categorization: for definitions of compliance
PERFORMANCE / ELECTRICAL
CHARACTERISTICS
www.vishay.com/doc?40192
Operating Temperature: -55 °C to +125 °C
(above 85 °C voltage derating is required)
please see www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
Capacitance Range: 0.1 μF to 470 μF
Capacitance Tolerance: 10 ꢀ, 20 ꢀ
Voltage Rating: 4 V to 50 V
APPLICATIONS
• Industrial
• Telecom infrastructure
• Consumer
• Medical
• General purpose
ORDERING INFORMATION
TL3
D
107
K
010
C
0100
TYPE
CASE CODE
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE
RATING AT +85 °C
TERMINATION
AND PACKAGING
ESR
See Ratings
and Case
Codes table
This is expressed
in picofarads. The
first two digits are
significant figures.
The third is the
number of zeros
to follow.
K = 10 ꢀ
M = 20 ꢀ
This is expressed in
volts. To complete
the three-digit block,
zeros precede the
voltage rating.
A decimal point is
indicated by an “R”
(6R3 = 6.3 V).
Matte tin
C = 7" (178 mm) reel
D = 13" (330 mm) reel
V = 7" (178 mm) reel,
dry pack
Maximum 100 kHz
ESR in mΩ.
See note below.
U = 13" (330 mm) reel,
dry pack
Tin / lead
E = 7" (178 mm) reel
F = 13" (330 mm) reel
T = 7" (178 mm) reel,
dry pack
W = 13" (330 mm) reel,
dry pack
Notes
•
We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.
Voltage substitutions will be marked with the higher voltage rating
•
•
The EIA and CECC standards for low ESR solid tantalum chip capacitors, allow delta ESR of 1.25 times the datasheet limit after mounting
Dry pack as specified in J-STD-033 for MSL3. Applicable for D and E cases only
Revision: 22-Jun-17
Document Number: 40154
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000