THS4561
SBOS874C – AUGUST 2017 – REVISED DECETMHBESR42506210
SBOS874C – AUGUST 2017 – REVISED DECEMBER 2020
www.ti.com
THS4561 Low-Power, High Supply Range, 60-MHz, Fully Differential Amplifier
differential output required by precision analog-to-
1 Features
digital converters (ADCs). Designed for a very low,
8-Hz, 1/f voltage noise corner and low, 130-dB total
harmonic distortion (THD) while consuming only a
775-µA quiescent current, the THS4561 is well suited
for power-sensitive data acquisition (DAQ) systems
where high performance is required with the best
signal-to-noise ratio (SNR) and spurious-free dynamic
range (SFDR) through the amplifier and ADC
combination.
•
•
•
•
Bandwidth: 60 MHz (G = 1 V/V)
Slew Rate: 230 V/µs
Gain Bandwidth Product: 68 MHz
Voltage Noise:
– 1/f Voltage Noise Corner: 8 Hz
– Broadband Noise (≥ 500 Hz): 4 nV/√ Hz
Input Offset: ±250 µV (Maximum)
– Drift: ±4 µV/°C (Maximum)
Supply Operating Range: 2.85 V to 12.6 V
Supply Current: 775 µA
Negative Rail Input (NRI)
Rail-to-Rail Output (RRO)
Very Low Harmonic Distortion:
– HD2: –117 dBc at 2 VPP, 100 kHz
– HD3: –124 dBc at 2 VPP, 100 kHz
0.01% Settling (2-V Step): 90 ns
•
The THS4561 features the required negative rail input
when interfacing a DC-coupled, ground-centered,
source signal to a single-supply, differential-input
ADC. Low DC error and drift terms support the
emerging high-speed and high-resolution successive
approximation register (SAR) and delta-sigma (ΔΣ)
ADC input requirements. A 2.85-V to 12.6-V supply
range with a flexible output common-mode setting
with low headroom to the supplies supports a wide
range of ADC input and digital-to-analog converter
(DAC) output requirements.
•
•
•
•
•
•
2 Applications
•
•
•
•
•
•
•
16-bit to 20-bit, Differential, SAR and ΔΣ Drivers
Differential Active Filters
High Output Swing PCM Audio DAC Outputs
Medical Ultrasounds
Battery Testers
Power Analyzers
The THS4561 device is characterized for operation
from –40°C to +125°C.
Device Information
PART NUMBER
PACKAGE(1)
BODY SIZE (NOM)
3.00 mm × 3.00 mm
2.00 mm × 2.00 mm
3.00 mm × 3.00 mm
VSSOP (8)
THS4561
WQFN (10)
Lower Power Alternate to the THS4551
VQFN (16)(2)
3 Description
(1) For all available packages, see the package option
addendum at the end of the data sheet.
The THS4561 fully differential amplifier (FDA) offers a
simple interface from single-ended sources to the
(2) Preview package.
-20
VS+
VSœ
THS4561
HD2, VO = 2 VPP
HD3, VO = 2 VPP
HD2, VO = 8 VPP
Using 5 VS
-30
+
+
-40
+5 V
œ5 V
3.57 kꢀ
œ
œ
-50
-60
HD3, VO = 8 VPP
HD2, VO = 10 VPP
HD3, VO = 10 VPP
330 pF
-70
357 ꢀ
909 ꢀ
-80
VS+
PD
G = 10 V/V
-90
10 nF
10 nF
PCM
Audio DAC
Output
50-kHz MFB
Butterworth
Output Driver
-100
-110
-120
-130
-140
-150
150 pF
FDA
VSœ
357ꢀ
909 ꢀ
330 pF
3.57 kꢀ
10k
100k
1M
10M
Frequency (Hz)
D007
Gain of 10 V/V PCM Audio DAC Output With
Second-Order MFB Filter at 50 kHz
Harmonic Distortion vs Frequency
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Product Folder Links: THS4561
Copyright © 2020 Texas Instruments Incorporated
Submit Document Feedback
1