Datasheet > TFM-126-03-L-S-A

TFM-126-03-L-S-A

更新时间： 2024-11-28 20:49:47

品牌	Logo	应用领域
申泰 - SAMTEC		PC 连接器
页数	文件大小	规格书
3页	215K
描述
Board Connector, 26 Contact(s), 1 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal, Locking, Black Insulator

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

TFM-126-03-L-S-A 技术参数

生命周期：	Active	Reach Compliance Code：	compliant
ECCN代码：	EAR99	HTS代码：	8536.69.40.40
风险等级：	5.78	主体宽度：	0.175 inch
主体深度：	0.22 inch	主体长度：	1.425 inch
连接器类型：	BOARD CONNECTOR	联系完成配合：	AU ON NI
联系完成终止：	TIN OVER NICKEL	触点性别：	MALE
触点材料：	PHOSPHOR BRONZE	触点模式：	RECTANGULAR
触点样式：	SQ PIN-SKT	绝缘体颜色：	BLACK
绝缘体材料：	LIQUID CRYSTAL POLYMER (LCP)	JESD-609代码：	e3
插接触点节距：	0.05 inch	安装选项1：	LOCKING
安装方式：	STRAIGHT	安装类型：	BOARD
连接器数：	ONE	PCB行数：	1
装载的行数：	1	最高工作温度：	125 °C
最低工作温度：	-55 °C	PCB接触模式：	RECTANGULAR
电镀厚度：	15u inch	极化密钥：	POLARIZED HOUSING
额定电流（信号）：	3.2 A	参考标准：	UL, CSA
可靠性：	COMMERCIAL	子类别：	Headers and Edge Type Connectors
端子长度：	0.111 inch	端子节距：	1.27 mm
端接类型：	SOLDER	触点总数：	26
Base Number Matches：	1

TFM-126-03-L-S-A 数据手册

TFM-1XX-XX-X-S-XX

NOTES:

REVISION AG

REPRESENTS A CRITICAL DIMENSION.

2. MINIMUM PUSHOUT FORCE: 16 OZ FOR TERMINALS, 12 OZ FOR WELD TABS,

AND 8 OZ FOR LOCKING CLIPS.

OPTION

No OF POSITIONS

ALL POSITIONS AVAILABLE

-A: ALIGNMENT PIN (USE TFM-XX-S-01-A)

(NOT AVAILABLE WITH -WT OPTION)

(SEE FIG 5, SHEET 2)

DO NOT

SCALE FROM

THIS PRINT

3. MEASURED FROM BEND.

4. MAXIMUM TERMINAL BURR: .003 [.08].

5. MAXIMUM HEIGHT VARIATION BETWEEN ANY TWO PINS: .005 [.13].

6. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION

IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS

MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.

-02 THRU -50

-LC: LOCKING CLIP (USE LC-05-TM)

(NOT AVAILABLE WITH -WT OPTION)

(SEE FIG 7, SHEET 3) (SEE NOTE 6)

-P: PICK AND PLACE PAD (USE PPP-15)

(SEE FIG 6, SHEET 2)

LEAD STYLE

-01: T-1R16-01-X-2

THROUGH HOLE

-02: T-1R16-01-X-2

SURFACE MOUNT

-03: T-1R16-10-X

THROUGH HOLE

(ONLY AVAILABLE ON -08 THRU -50 POSITIONS)

-K: POLYIMIDE FILM (SEE FIG 3, SHEET 2)

(USE K-DOT-.217-.313-.005)

-WT: WELD TABS (USE WT-25-07-T)

(SEE FIG 4, SHEET 2)

((No. OF POSITIONS x .050[1.27])

+ .125[3.18])REF

(AVAILABLE ON -02 THRU -30 POS ONLY)

(NOT AVAILABLE WITH -A OR -LC OPTIONS)

-TR: TAPE & REEL

PLATING SPECIFICATIONS

((No. OF POSITIONS x .050[1.27])

+ .025[.64])REF

(SEE SHEET 3, TAPE AND REEL VIEW)

-SN: SOLDER NAIL (USE WT-27-03)

-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

(NOT AVAILABLE WITH -A, -LC, OR

-WT OPTIONS) (SEE FIG 8, SHEET 3)

-F: 3µ" FLASH GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

.100 2.54 REF

-G: 30µ" GOLD IN CONTACT AREA,

3µ" GOLD ON TAIL

BODY SPECIFICATION

-S: SINGLE ROW

(USE TFM-XX-S-XX-XX)

-L: 15µ" LIGHT GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

.105 2.67 REF

.175 4.45 REF

.065 1.65

-H: 50µ" HEAVY GOLD IN CONTACT AREA,

3µ" GOLD ON TAIL

-T: MATTE TIN CONTACT AND TAIL

.083 2.11

.050 1.27 REF

** NOT TOOLED

((No. OF POSITIONS x .050[1.27])

- .050[1.27])

MAX SWAY

(EITHER DIRECTION)

.018 0.46 REF

"A"

.1635 4.153 REF

.2200 5.588

"B" REF

REF

.010 0.25 REF

"A"

"A" .003

MAX SWAY

"C"±.003

.014 0.36 REF

MAX SWAY

(EITHER DIRECTION)

((No. OF POSITIONS x .050[1.27])

- .050[1.27])

SECTION "A"-"A"

TABLE 1

POSITION

-02 THRU -29

-030 THRU -39

-40 THRU -50

COPLANARITY

.004 [.10]

.006 [.15]

IN-PROCESS

FIG 1

PROPRIETARY NOTE

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN INCHES.

TOLERANCES ARE:

(TFM-115-01-X-S-XX SHOWN)

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

.008 [.20]

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DECIMALS

ANGLES

.XX: .01 [.3]

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

.XXX: .005 [.13]

TABLE 2

"A"

TFM-XX-S-01-XX .078 [1.98] .131 [3.33] .428 [10.87] .303 [7.70]

TFM-XX-S-01-XX N/A .131 [3.33] .428 [10.87] .231 [5.87]

TFM-XX-S-01-XX .111 [3.33] .139 [3.53] .645 [16.38] .356 [9.04]

.XXXX: .0020 [.051]

LEAD STYLE

BODY

"B"

"C"

"E"

SHEET SCALE: 1:0.4

MATERIAL:

DO NOT SCALE DRAWING

DESCRIPTION:

-01

-02

-03

INSULATOR: LCP, UL 94 V0, COLOR: BLACK

TERMINAL: PHOSPHOR BRONZE

.050 C.L. SINGLE ROW SHROUDED TERMINAL STRIP

DWG. NO.

TFM-1XX-XX-X-S-XX

8/21/2008 SHEET 1 OF 3

BY: D. SCHMELZ

F:\DWG\MISC\MKTG\TFM-1XX-XX-X-S-XX-MKT.SLDDRW

12 3

中文翻译

下载PDF

与TFM-126-03-L-S-A相关器件

型号	品牌	获取价格	描述	数据表
TFM-126-03-L-S-LC	SAMTEC	获取价格	Board Connector, 26 Contact(s), 1 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal
TFM-126-03-L-S-SN	SAMTEC	获取价格	Board Connector, 26 Contact(s), 1 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal
TFM-126-03-L-S-TR	SAMTEC	获取价格	Board Connector, 26 Contact(s), 1 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal
TFM-126-03-L-S-WT	SAMTEC	获取价格	Board Connector
TFM-126-03-T-S-A	SAMTEC	获取价格	Board Connector, 26 Contact(s), 1 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal
TFM-126-03-T-S-TR	SAMTEC	获取价格	Board Connector, 26 Contact(s), 1 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal
TFM-126-03-T-S-WT	SAMTEC	获取价格	Board Connector
TFM-127-01-F	SAMTEC	获取价格	Board Connector, 54 Contact(s), 2 Row(s), Male, Straight, Solder Terminal,
TFM-127-01-F-D-LC	SAMTEC	获取价格	Board Connector, 54 Contact(s), 2 Row(s), Male, Straight, Solder Terminal,
TFM-127-01-F-D-RA	SAMTEC	获取价格	Board Connector, 54 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal,

与TFM-126-03-L-S-A相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

47
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

37
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

65
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

61

产品中心

服务支持

精选活动

关于我们

帮助中心

TFM-126-03-L-S-A

TFM-126-03-L-S-A 技术参数

TFM-126-03-L-S-A 数据手册

与TFM-126-03-L-S-A相关器件

与TFM-126-03-L-S-A相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

TFM-126-03-L-S-A

TFM-126-03-L-S-A 技术参数

TFM-126-03-L-S-A 数据手册

与TFM-126-03-L-S-A相关器件

与TFM-126-03-L-S-A相关文章

您还可以找

您在本页遇到什么问题？