NOTES:
REVISION P
TFM-1XX-XX-X-S-XX
C
1.
REPRESENTS A CRITICAL DIMENSION.
C1
2. MINIMUM PUSHOUT FORCE TO BE 12 OZ RETENTION FOR CONTACTS AND WELD TABS.
3. COPLANARITY: .004[.10] = POS 02 THRU 26
.006[.15] = POS 27 THRU 50
OPTION
No OF POSITIONS
ALL POSITIONS AVAILABLE
-5 THRU -50
-A: ALIGNMENT PIN (USE TFM-XX-S-01-A
-LC: LOCKING CLIP (USE LC-05-TM)
-P: PICK AND PLACE PAD (USE PPP-15)
(SEE FIG 6)(NOT AVAILABLE -05 POSITION)
-K: POLYIMIDE FILM (SEE FIG 3)
-WT: WELD TABS (USE WT-25-XX-T)
(AVAILABLE ON ALL LEAD STYLES)
(SEE FIG. 4 SHEET 2)
4. MANUFACTURING IN PROCESS DIMENSION DESIGNED TO ACHIEVE FINAL ASSEMBLY.
5. MEASURED FROM BEND.
6. MEASURE FROM TIPS OF PIN.
7. .003[.08] MAXIMUM TERMINAL BURR.
DO NOT
SCALE FROM
THIS PRINT
8. .005 MAXIMUM HEIGHT VARIATION BETWEEN ANY TWO PINS.
9. MINIMUM LOCKING CLIP RETENTION TO BE 8 OZS.
LEAD STYLE
-01: T-1R16-01-X-2
THROUGH HOLE
-02: T-1R16-01-X-2
SURFACE MOUNT
-03: T-1R16-10-X
THROUGH HOLE
(AVAILABLE ON -05 THRU -30 POS ONLY)
(AVAILABLE WITH -S PLATING ONLY)
(NOT AVAILABLE WITH
-A, OR -LC OPTIONS)
((No. OF POSITIONS x .050[1.27])
+ .125[3.18])REF
BODY SPECIFICATION
-S: SINGLE ROW
PLATING SPECIFICATIONS
(USE TFM-XX-S-XX-XX)
-S: SELECTIVE- .000030 GOLD POST;
.000150-.000250 BRIGHT ACID TIN TAIL.
((No. OF POSITIONS x .050[1.27])
+ .025[.64])REF
(USE T-1R16-XX-S-XX) (SPECIFY -S IN PLATING SUFFIX -X)
-F: FLASHED GOLD- .000003 GOLD POST;
.000150-.000250 BRIGHT ACID TIN TAIL.
(USE T-1R16-XX-F-XX) (SPECIFY -F IN PLATING SUFFIX -X)
-P: GOLD FLASHED PALLADIUM NICKEL-
.000030 PALLADIUM NICKEL;
.110 2.79 REF
.105 2.67 REF
.125 3.18 REF
.065 1.65
FLASHED WITH .000003 GOLD POST;
.000150-.000250 BRIGHT ACID TIN TAIL.
(USE T-1R16-XX-P-XX) (SPECIFY -P IN PLATING SUFFIX -X)
.083 2.11
.050 1.27 REF
2 MAX TOE
(TYP)
.018 0.46
2
"A"
MAX SWAY
(TYP)
.1635 4.153 REF
.2200 5.588
"B" REF
.010 0.25 REF
C3
C4
"A"
"A"
2
MAX SWAY (TYP)
"C"
.014 0.36 REF
2
MAX TOE (TYP)
C2
((No. OF POSITIONS x .050[1.27])
- .050[1.27])
C1
FIGURE 1
TABLE 1
IN-PROCESS
ALLOWABLE COPLANARITY
POSITIONS
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
-05 THRU -29
-030 THRU -39
-40 THRU -50
.004 MAX
.006 MAX
.008 MAX
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
.XXX: .005 [.13]
.XXXX: .0020 [.051]
SHEET SCALE: 2.5:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
TABLE 2
INSULATOR: LIQUID CRYSTAL POLYMER, COLOR: BLACK
TERMINAL: PHOSPHOR BRONZE
.050 C.L. SINGLE ROW SHROUDED TERMINAL STRIP
DWG. NO.
LEAD STYLE
BODY
"A"
"B"
"C"
-01
-03
TFM-XX-S-XX-XX
TFM-XX-S-XX-XX
0.075 [1.91]
0.109 [2.77]
0.133 [3.38]
0.140 [3.56]
0.4285 [10.884]
0.644 [16.36]
TFM-1XX-XX-X-S-XX
8/21/2008 SHEET 1 OF 4
BY: D. SCHMELZ
F:\DWG\MISC\MKTG\TFM-1XX-XX-X-S-XX-MKT.SLDDRW