5秒后页面跳转
捷配首页

Datasheet > TFM-115-01-S-D
TFM-115-01-S-D PDF预览

TFM-115-01-S-D

更新时间： 2024-11-24 18:14:35
品牌 Logo 应用领域
申泰 - SAMTEC PC连接器
页数 文件大小 规格书
7页 2593K
描述
Board Connector, 30 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal, Guide Slot, Black Insulator, Receptacle, ROHS COMPLIANT

阅读下载

中文翻译

获取价格

TFM-115-01-S-D 技术参数

是否无铅： 不含铅是否Rohs认证： 符合
生命周期：Active包装说明：ROHS COMPLIANT
Reach Compliance Code：compliantECCN代码：EAR99
HTS代码：8536.69.40.40Factory Lead Time：2 weeks
风险等级：2.27Samacsys Description：High-Reliability Tiger Eye ™ Terminal Strips, .050 " Pitch
其他特性：ROHS COMPLIANT主体宽度：0.225 inch
主体深度：0.22 inch主体长度：0.875 inch
连接器类型：BOARD CONNECTOR联系完成配合：GOLD (30) OVER NICKEL (50)
联系完成终止：Tin (Sn) - with Nickel (Ni) barrier触点性别：MALE
触点材料：PHOSPHOR BRONZE触点模式：RECTANGULAR
触点样式：SQ PIN-SKTDIN 符合性：NO
滤波功能：NOIEC 符合性：NO
绝缘体颜色：BLACK绝缘体材料：LIQUID CRYSTAL POLYMER (LCP)
JESD-609代码：e3MIL 符合性：NO
插接触点节距：0.05 inch匹配触点行间距：0.05 inch
混合触点：NO安装选项1：GUIDE SLOT
安装选项2：LOCKING安装方式：STRAIGHT
安装类型：BOARD连接器数：ONE
PCB行数：2装载的行数：2
最高工作温度：125 °C最低工作温度：-55 °C
选件：GENERAL PURPOSEPCB接触模式：RECTANGULAR
PCB触点行间距：1.27 mm电镀厚度：30u inch
极化密钥：POLARIZED HOUSING额定电流（信号）：3.2 A
参考标准：UL, CSA可靠性：COMMERCIAL
子类别：Headers and Edge Type Connectors端子节距：1.27 mm
端接类型：SOLDER触点总数：30
UL 易燃性代码：94V-0Base Number Matches：1

TFM-115-01-S-D 数据手册

 浏览型号TFM-115-01-S-D的Datasheet PDF文件第2页浏览型号TFM-115-01-S-D的Datasheet PDF文件第3页浏览型号TFM-115-01-S-D的Datasheet PDF文件第4页浏览型号TFM-115-01-S-D的Datasheet PDF文件第5页浏览型号TFM-115-01-S-D的Datasheet PDF文件第6页浏览型号TFM-115-01-S-D的Datasheet PDF文件第7页 
NOTES:  
TFM-1XX-XX-XXX-D-XXX  
REVISION FE  
C
OPTION  
1.  
REPRESENTS A CRITICAL DIMENSION.  
No OF POSITIONS  
2. MINIMUM PUSHOUT FORCE FOR CONTACTS, WELD TABS,  
AND THREADED INSERTS: 12 OZ.  
3. MINIMUM LOCKING CLIP RETENTION: 8 OZS.  
4. MAXIMUM HEIGHT VARIATION BETWEEN ANY TWO PINS: .005[0.13]  
5. MAXIMUM TERMINAL BURR: .003[0.08]  
6. COPLANARITY: .004[0.10] = POS 02 THRU 26  
.006[0.15] = POS 27 THRU 50  
7. MEASURED FROM BEND.  
8. DIMENSION CHANGED PER REVISION AD. CONTACT ENGINEERING  
FOR INFORMATION.  
9. MEASURE FROM TIPS OF PIN.  
10. THIS FEATURE ONLY PRESENT ON -01 &-02 LEAD STYLES.  
11. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED,  
THE –LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC  
RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE  
–LC OPTION.  
12. SIDES OF PLASTIC BODIES ON ALL LEAD STYLES EXCEPT THE -01, -02 & -03  
WILL BE SOLID AND WITHOUT SIDE SLOTS.  
13. NOTE DELETED.  
-A: ALIGNMENT PIN (USE TFM-XX-D-XX-A,  
SEE TABLE 1) (SEE FIG 8, SHT 3)  
LEAD STYLE -01, -02, -03: -02 THRU -50 (ALL  
DO NOT  
SCALE FROM  
THIS PRINT  
POSITIONS AVAILABLE)  
(NOT AVAILABLE FOR -RA OR -REX)  
-LC: LOCKING CLIP (USE LC-05-TM)  
(NOT AVAILABLE FOR -RA OR -REX)  
(SEE FIG 10, SHT 3 & NOTES 3 & 11)  
-P: PICK AND PLACE PAD (USE PPP-04)  
(AVAILABLE IN ALL POSITIONS -05 THRU  
-50 EXCEPT -05 WITH -WT)  
LEAD STYLES -11, -12, -13: (-05 THRU -50 MULTIPLES OF 5)  
POSITIONS 12, 16, 17 ALSO AVAILABLE  
LEAD STYLES -21, 22, 23: (-05 THRU -50 MULTIPLES OF 5)  
POSITIONS 12 & 13 ALSO AVAILABLE  
C
LEAD STYLES 31, 32: 12 POSITION ALSO AVAILABLE  
(NOT AVAILABLE FOR -RA OR -REX,  
SEE FIG 7, SHT 3)  
LEAD STYLE  
-RA: RIGHT ANGLE  
THROUGH HOLE  
-01, -03 (SEE FIG 1)  
-11, -13 (SEE FIG 1)  
-21,-23 (SEE FIG 1)  
-31 (SEE FIG 1)  
SURFACE MOUNT  
-02 (SEE FIG 2)  
-12 (SEE FIG 2)  
-22 (SEE FIG 2)  
-32 (SEE FIG 2)  
(AVAILABLE ONLY IN LEAD STYLE: -01  
SEE FIG 5, SHT 2)  
-TR: TAPE AND REEL (SEE FIG 4, SHT 7)  
(NOT AVAILABLE WITH -DS OPTION  
OR THROUGH HOLE LEAD STYLE)  
-SA: STAKED ALIGNMENT PIN (SEE FIG 9, SHT 3)  
(ONLY AVAILABLE ON SURFACE MOUNT  
LEAD STYLE)  
PLATING SPECIFICATION  
-S: 30µ" SELECTIVE GOLD ON CONTACT AREA,  
MATTE TIN TAIL  
-L: 15µ" SELECTIVE GOLD ON CONTACT AREA,  
MATTE TIN TAIL  
-K: POLYIMIDE FILM (SEE FIG 3, SHT 2)  
(USE K-DOT-.217-.313-.005)  
(No OF POSITIONS x .050[1.27]) + .125[3.18] REF  
(No OF POSITIONS x .050[1.27]) + .025[.64] REF  
-F: 3µ" FLASH GOLD ON CONTACT AREA,  
MATTE TIN TAIL  
(NOT AVAILABLE FOR -RA OR -REX)  
(ALL LEAD STYLES EXCEPT -21 AVAILABLE)  
-WT: WELD TABS (USE WT-25-XX-T)  
(AVAILABLE ON -01, -02 & -03 LEAD  
STYLES ONLY) (SEE FIG 6, SHT 2)  
(MATES WITH SFSS/SFSD -SR & -DR ONLY)  
(NOT AVAILABLE WITH -A, -LC,  
-H: 30µ" SELECTIVE GOLD ON CONTACT AREA,  
3µ" FLASH GOLD ON TAIL  
.110 2.79 REF  
02  
-SM: 30µ" SELECTIVE GOLD ON CONTACT AREA,  
MATTE TIN TAIL  
-LM: 15µ" SELECTIVE GOLD ON CONTACT AREA,  
MATTE TIN TAIL  
.155 3.94  
REF  
-RA, OR -SA OPTIONS)  
-FM: 3µ" FLASH GOLD ON CONTACT AREA,  
MATTE TIN TAIL  
-RE1: RIGHT ANGLE ELEVATED .062 PCB  
(USE TFM-XX-D-01-RE, NOT AVAILABLE  
WITHOUT -WT, AVAILABLE IN LEAD  
STYLE -01 ONLY, -03 THRU -50 POS)  
(MATES WITH SFSS/SFSD -SR & -DR ONLY)  
(SEE FIG 11, SHT 4)  
-RE2: RIGHT ANGLE ELEVATED .093 PCB  
(USE TFM-XX-D-01-RE, NOT AVAILABLE  
WITHOUT -WT, AVAILABLE IN LEAD  
STYLE -01 ONLY, -03 THRU -50 POS)  
(MATES WITH SFSS/SFSD -SR & -DR ONLY)  
(SEE FIG 11, SHEET 4)  
-STL: 30µ" SELECTIVE GOLD ON CONTACT AREA,  
TIN/LEAD (90/10 ±5%) TAIL  
01  
.050 1.27  
REF  
.225 5.72  
REF  
SEE NOTE 10  
.075 1.91  
REF  
BODY SPECIFICATION  
-D: DOUBLE ROW  
C
.050 1.27  
(No OF POSITIONS x .050[1.27]) - .050[1.27]  
2
MAX SWAY  
(EITHER DIRECTION)  
.018 0.46 REF  
.135 3.43 REF  
-SN: SOLDER NAIL FOR .062 BOARD  
(TFM-XX-D-01-SN AND WT-27-01-T)  
(SEE FIG12, SHT 3)  
"D" REF  
2
MAX SWAY  
"A"  
(SEE TABLE 1,  
SHT 7)  
(EITHER DIRECTION)  
(ONLY AVAILABLE WITH -02 LEAD STYLE)  
(NOT AVAILABLE WITH OPTIONS -A, -LC,  
-RA, -SA, -WT, -RE1 OR -RE2)  
.096 2.44  
.1635 4.153  
REF  
"A" REF  
(SEE TABLE 1,  
SHT 7)  
(SEE NOTE 8)  
-SN2: SOLDER NAIL FOR .093 BOARD  
(TFM-XX-D-01-SN AND WT-27-02-T)  
(SEE FIG12, SHT 3)  
(ONLY AVAILABLE WITH -02 LEAD STYLE)  
(NOT AVAILABLE WITH OPTIONS -A, -LC,  
-RA, -SA, -WT, -RE1 OR -RE2)  
SEE NOTE 12  
.010 0.25 REF  
-DS: DUAL SCREW DOWN FOR .062 BOARD  
(SEE FIG 18, SHT 5)  
.014 0.36 REF  
MAX SWAY  
"A"  
"J" ± .003 [0.08]  
(SEE TABLE 1, SHT 7)  
C
(ONLY AVAILABLE WITH -01 & -02 LEAD STYLE)  
(NOT AVAILABLE WITH OPTIONS -A, -LC, -P,  
-RA, -TR, -SA, -K, -WT, -RE1, -RE2, -SN, -SN2)  
(-01 LEAD STYLE USES TFM-XX-D-01-DSL  
& T1-M2-4-VSFM-T, 02 LEAD STYLE USES  
TFM-XX-D-01-DSA & T1-M2-4-VSFM-T)  
C
.050 1.27  
2
(EITHER DIRECTION)  
C
2
MAX SWAY  
(EITHER DIRECTION)  
SECTION "A"-"A"  
UNLESS OTHERWISE SPECIFIED,  
DIMENSIONS ARE IN INCHES.  
(No OF POSITIONS x .050[1.27]) - .050[1.27]  
C
PROPRIETARY NOTE  
THIS DOCUMENT CONTAINS CONFIDENTIAL AND  
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,  
TOLERANCES ARE:  
DECIMALS  
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS  
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,  
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE  
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR  
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY  
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS  
WRITTEN CONSENT OF SAMTEC, INC.  
ANGLES  
2
"C"±.003 [0.08]  
(SEE TABLE 1,  
C
.XX: .01[0.3]  
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
FIG 1  
.XXX: .005[0.13]  
PHONE: 812-944-6733  
e-Mail info@SAMTEC.com  
FAX: 812-948-5047  
code 55322  
.XXXX: .0020[0.051]  
THROUGH HOLE  
SHT 7)  
-01, -03, -11, -13, -21, -23, -31  
SHEET SCALE: 2.5:1  
MATERIAL:  
DO NOT SCALE DRAWING  
DESCRIPTION:  
INSULATOR:  
LCP, UL 94-VO  
COLOR: BLACK  
.050 X .050 TERMINAL STRIP  
DWG. NO.  
IN-PROCESS  
TFM-1XX-XX-XXX-D-XXX  
TERMINAL: PHOSPHOR BRONZE  
F:\DWG\MISC\MKTG\TFM-1XX-XX-XXX-D-XXX-MKT.SLDDRW  
SHEET 1 OF  
7
BY: garyp  
11/5/2014  
1234567

中文翻译

下载PDF

TFM-115-01-S-D 替代型号

型号 品牌 替代类型 描述 数据表
M50-4701545 HARWIN

类似代替

 1.27mm PITCH DIL VERTICAL PIN HEADER ASSY

与TFM-115-01-S-D相关器件

型号 品牌 获取价格 描述 数据表
TFM-115-01-S-D-A SAMTEC

获取价格

 		.050 X .050 MICRO STRIPS
TFM-115-01-S-D-A-K SAMTEC

获取价格

 		.050 X .050 MICRO STRIPS
TFM-115-01-S-D-A-P SAMTEC

获取价格

 		.050 X .050 MICRO STRIPS
TFM-115-01-S-D-LC SAMTEC

获取价格

 		.050 X .050 MICRO STRIPS
TFM-115-01-S-D-RA SAMTEC

获取价格

 		Board Stacking Connector, 30 Contact(s), 2 Row(s), Male, Right Angle, 0.05 inch Pitch, Sol
TFM-115-01-S-D-RE1-WT SAMTEC

获取价格

 		.050 X .050 MICRO STRIPS
TFM-115-01-S-D-RE2-WT SAMTEC

获取价格

 		.050 X .050 MICRO STRIPS
TFM-115-01-S-D-WT SAMTEC

获取价格

 		CONN HEADER 30POS 1.27MM GLD PCB
TFM-115-01-SM-D-RE1-WT SAMTEC

获取价格

 		Board Connector, 30 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal,
TFM-115-01-SM-D-RE2-WT SAMTEC

获取价格

 		Board Connector, 30 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal,

与TFM-115-01-S-D相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证