TC1301A/B
Dual LDO with Microcontroller RESET Function
Features
Description
• Dual Output LDO with Microcontroller Reset
Monitor Functionality:
The TC1301A/B combines two Low Dropout (LDO)
regulators and a microcontroller RESET function into a
single 8-pin MSOP or DFN package. Both regulator
outputs feature low dropout voltage, 104 mV
- VOUT1 = 1.5V to 3.3V @ 300 mA
- VOUT2 = 1.5V to 3.3V @ 150 mA
- VRESET = 2.20V to 3.20V
@ 300 mA for VOUT1, 150 mV @ 150 mA for VOUT2
,
low quiescent current consumption, 58 µA each and a
typical regulation accuracy of 0.5%. Several fixed-
output voltage and detector voltage combinations are
available. A reference bypass pin is available to further
reduce output noise and improve the power supply
rejection ratio of both LDOs.
• Output Voltage and RESET Threshold Voltage
Options Available (See Table 8-1)
• Low Dropout Voltage:
- VOUT1 = 104 mV @ 300 mA, Typical
- VOUT2 = 150 mV @ 150 mA, Typical
The TC1301A/B is stable over all line and load
conditions with a minimum of 1 µF of ceramic output
capacitance, and utilizes a unique compensation
scheme to provide fast dynamic response to sudden
line voltage and load current changes.
• Low Supply Current: 116 µA, Typical
TC1301A/B with both output voltages available
• Reference Bypass Input for Low-Noise Operation
• Both Output Voltages Stable with a Minimum of
1 µF Ceramic Output Capacitor
For the TC1301A, the microcontroller RESET function
operates independently of both VOUT1 and VOUT2. The
input to the RESET function is connected to the VDET
pin.The SHDN2 pin is used to control the output of
• Separate Input for RESET Detect Voltage
(TC1301A)
• Separate VOUT1 and VOUT2 SHDN pins
(TC1301B)
V
OUT2 only. VOUT1 will power-up and down with VIN.
In the case of the TC1301B, the detect voltage input of
the RESET function is connected internally to VOUT1
• RESET Output Duration: 300 ms. Typical
• Power-Saving Shutdown Mode of Operation
• Wake-up from SHDN: 5.3 µs. Typical
• Small 8-pin DFN and MSOP Package Options
• Operating Junction Temperature Range:
- -40°C to +125°C
.
Both VOUT1 and VOUT2 have independent shutdown
capability.
Additional features include an overcurrent limit and
overtemperature protection that, when combined,
provide a robust design for all load fault conditions.
• Overtemperature and Overcurrent Protection
Applications
Package Types
• Cellular/GSM/PHS Phones
• Battery-Operated Systems
• Hand-Held Medical Instruments
• Portable Computers/PDAs
• Linear Post-Regulators for SMPS
• Pagers
8-Pin DFN/MSOP
TC1301A
DFN8
MSOP8
VDET
VIN
RESET 1
8
7
6
5
1
2
3
RESET
VOUT1
GND
8
7
6
5
VDET
VIN
VOUT1
2
VOUT2
VOUT2
GND
3
4
Related Literature
Bypass 4
SHDN2
Bypass
SHDN2
• AN765, “Using Microchip’s Micropower LDOs”,
DS00765, Microchip Technology Inc., 2002
TC1301B
DFN8
MSOP8
• AN766, “Pin-Compatible CMOS Upgrades to
BiPolar LDOs”, DS00766, Microchip Technology
Inc., 2002
SHDN1
VIN
RESET 1
8
7
6
5
1
2
3
RESET
VOUT1
GND
8
7
6
5
SHDN1
VIN
VOUT1
2
• AN792, “A Method to Determine How Much
Power a SOT23 Can Dissipate in an Application”,
DS00792, Microchip Technology Inc., 2001
VOUT2
VOUT2
GND
3
4
Bypass 4
SHDN2
Bypass
SHDN2
© 2005 Microchip Technology Inc.
DS21798B-page 1