TAS5414C-Q1
TAS5424C-Q1
www.ti.com
SLOS795C –SEPTEMBER 2013–REVISED JULY 2013
FOUR-CHANNEL AUTOMOTIVE DIGITAL AMPLIFIERS
Check for Samples: TAS5414C-Q1, TAS5424C-Q1
1
FEATURES
2
•
•
•
•
•
TAS5414C-Q1 – Single-Ended Input
•
•
44-Pin PSOP3 (DKE) Power SOP Package With
Heat Slug Up for TAS5424C-Q1
TAS5424C-Q1 – Differential Input
64-Pin QFP (PHD) Power Package With Heat
Slug Up for TAS5414C-Q1
Four-Channel Digital Power Amplifier
Four Analog Inputs, Four BTL Power Outputs
Typical Output Power at 10% THD+N
•
•
•
•
Designed for Automotive EMC Requirements
Qualified According to AEC-Q100
–
–
–
–
28 W/Ch Into 4 Ω at 14.4 V
50 W/Ch Into 2 Ω at 14.4 V
79 W/Ch Into 4 Ω at 24 V
ISO9000:2002 TS16949 Certified
–40°C to 105°C Ambient Temperature Range
150 W/Ch Into 2 Ω at 24 V (PBTL)
APPLICATIONS
•
Channels Can Be Paralleled (PBTL) for High-
Current Applications
OEM/Retail Head Units and Amplifier Modules
Where
Feature
Densities
and
System
•
•
THD+N < 0.02%, 1 kHz, 1 W Into 4 Ω
Configurations Require Reduction in Heat
From the Audio Power Amplifier
Patented Pop- and Click-Reduction
Technology
DESCRIPTION
–
–
Soft Muting With Gain Ramp Control
Common-Mode Ramping
The TAS5414C-Q1 and TAS5424C-Q1 are four-
channel digital audio amplifiers designed for use in
automotive head units and external amplifier
modules. They provide four channels at 23 W
continuously into 4 Ω at less than 1% THD+N from a
14.4-V supply. Each channel can also deliver 38 W
into 2 Ω at 1% THD+N. The TAS5414C-Q1 uses
single-ended analog inputs, whereas the TAS5424C-
Q1 employs differential inputs for increased immunity
to common-mode system noise. The digital PWM
topology of the device provides dramatic
improvements in efficiency over traditional linear
amplifier solutions. This reduces the power dissipated
by the amplifier by a factor of ten under typical music
playback conditions. The device incorporates all the
functionality needed to perform in the demanding
OEM applications area. The devices have built-in
load diagnostic functions for detecting and diagnosing
misconnected outputs to help to reduce test time
during the manufacturing process.
•
•
•
•
Patented AM Interference Avoidance
Patented Cycle-by-Cycle Current Limit
75-dB PSRR
Four-Address I2C Serial Interface for Device
Configuration and Control
•
•
Channel Gains: 12-dB, 20-dB, 26-dB, 32-dB
Load Diagnostic Functions:
–
–
–
Output Open and Shorted Load
Output-to-Power and -to-Ground Shorts
Patented Tweeter Detection
•
Protection and Monitoring Functions:
–
–
–
Short-Circuit Protection
Load-Dump Protection to 50 V
Fortuitous Open-Ground and -Power
Tolerant
–
Patented Output DC Level Detection While
Music Playing
–
–
–
Overtemperature Protection
Over- and Undervoltage Conditions
Clip Detection
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2013, Texas Instruments Incorporated