Datasheet > T530X477M006A

T530X477M006A

更新时间： 2024-11-24 00:54:03

品牌	Logo	应用领域
基美 - KEMET		/
页数	文件大小	规格书
17页	1076K
描述
KEMET Organic Capacitor (KO-CAP) T530 High Capacitance/125Â°C Rated Polymer Tantalum

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

T530X477M006A 数据手册

KEMET Organic Capacitor (KO-CAP)

T530 High Capacitance/125°C Rated Polymer Tantalum

Overview

The KEMET Organic Capacitor (KO-CAP) is a tantalum

capacitor with a Ta anode and Ta₂O₅dielectric. A conductive

organic polymer replaces the traditionally used MnO₂as the

cathode plate of the capacitor. This results in very low ESR and

improved capacitance retention at high frequency. The KO-

CAP also exhibits a benign failure mode which eliminates the

ignition failures that can occur in standard MnO₂tantalum types.

KO-CAPs may also be operated at steady state voltages up to

90%ꢀofꢀratedꢀvoltageꢀforꢀpartꢀtypesꢀwithꢀratedꢀvoltagesꢀofꢀ≤10ꢀ

volts and up to 80% of rated voltage for part types >10 volts with

equivalent or better reliability than traditional MnO₂tantalum

capacitors operated at 50% of rated voltage.

The T530 Series KO-CAP offers the same advantages as

the T520 Series but also has the added advantages of higher

capacitance, 125°C performance capability, higher ripple current

handling capability and a lower ESR range. Packaged as multiple

anodes to reduce the depth that the signal must penetrate, this

parallel arrangement reduces the ESR further still to achieve the

highest capacitance and lowest ESR of any other type of surface

mountꢀcapacitorꢀwithꢀtypicalꢀESRꢀvaluesꢀasꢀlowꢀasꢀ4ꢀmΩ.ꢀWithꢀ

reduced ESR, the enhanced capacitance retention at higher

frequencies provides the lowest total capacitance and most

economical solution for high power applications.

Beneﬁts

Applications

•ꢀ ESR:ꢀ4ꢀmΩꢀtoꢀ40ꢀmΩ

• 125°C maximum operating temperature

• Polymer cathode technology

Typical applications include high speed server, microprocessor

decoupling and high ripple current applications.

• High frequency capacitance retention

• Non-ignition failure mode

• Capacitance: 150 µF to 1,500 µF

• 100% accelerated steady state aging

• 100% surge current tested

• Utilizes multiple tantalum anode technology

•ꢀ Volumetricꢀefﬁciency

•ꢀ Useꢀupꢀtoꢀ90%ꢀofꢀratedꢀvoltageꢀ(10%ꢀderating)ꢀforꢀpartꢀtypesꢀ≤ꢀ10ꢀV

• Use up to 80% of rated voltage (20% derating) for part types > 10 V

• Self-healing mechanism

• EIA standard case sizes

Environmental Compliance

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn Solder

One world. One KEMET

T2019_T530 • 2/3/2014

12 3 4 5 6 7...17

中文翻译

下载PDF

与T530X477M006A相关器件

型号	品牌	获取价格	描述	数据表
T530X477M006AE006	KEMET	获取价格	POLYMER TANTALUM CHIP CAPACITORS
T530X477M006AE010	KEMET	获取价格	POLYMER TANTALUM CHIP CAPACITORS
T530X477M006AGE004	KEMET	获取价格	Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 6.3V, 20% +Tol, 20% -Tol, 470uF,
T530X477M006AGE0047280	KEMET	获取价格	Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 6.3V, 20% +Tol, 20% -Tol, 470uF,
T530X477M006AH4095	KEMET	获取价格	High Capacitance/Ultra-Low ESR Tantalum Surface Mount Capacitor
T530X477M006AH4096	KEMET	获取价格	High Capacitance/Ultra-Low ESR Tantalum Surface Mount Capacitor
T530X477M006AH4097	KEMET	获取价格	High Capacitance/Ultra-Low ESR Tantalum Surface Mount Capacitor
T530X477M006AS	TI	获取价格	60-A, 3.3/5-V INPUT, NONISOLATED WIDE-OUTPUT ADJUST POWER MODULE
T530X477M006ASE004	KEMET	获取价格	Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 6.3V, 20% +Tol, 20% -Tol, 470uF,
T530X477M006ASE005	KEMET	获取价格	Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 6.3V, 20% +Tol, 20% -Tol, 470uF,

与T530X477M006A相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

35
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

26
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

54
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

52

产品中心

服务支持

精选活动

关于我们

帮助中心

T530X477M006A

T530X477M006A 数据手册

与T530X477M006A相关器件

与T530X477M006A相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

T530X477M006A

T530X477M006A 数据手册

与T530X477M006A相关器件

与T530X477M006A相关文章

您还可以找

您在本页遇到什么问题？