PASSIVE SIGNAL AMPLIFIER Iin&Iout
T1100RN/RS/N/S
DESCRIPTION
PRODUCT PROGRAM
T1100 series, a standard analog amplifier,
with anterior circuit 4-20mA current signal input
and posterior 4-20mA current signal output ,is a
passive signal isolation module .the series
adopt magneto design and high efficiency loop
electric-larceny technology ,efficiently reducing
the reliance of current signal isolation on the
power ,realize 4-20mA standard signal isolation
with high accuracy and line regulation. Besides,
the modules have extremely low temperature
drift (no more than 35ppm/℃ under -25°C to
+71 °C) .The isolation voltage between the input
and output can up to 3KVDC.
Part
Number
Power
Supply
Isolation
Power Output
Input
Output
Channels
Package
T1100RN
T1100RS
T1100N
T1100S
None
None
None
None
4-20mA
4-20mA
4-20mA
4-20mA
4-20mA
4-20mA
4-20mA
4-20mA
None
None
None
None
1
1
1
1
DIP16
SOIC16
DIP16
SOIC16
ELECTRICAL CHARACTERISTICS
Power Supply
None
Power Supply Data
Power Dissipation None
Power Protection
Input Signal
Input Impedance
Overload
None
4 -20mA
Voltage Drop≤250mV(At input signal=20mA)
≤300mA
FEATURES
● Two-port isolation(Between input and output)
Input Data
● High accuracy (0.1% F.S.)
Voltage Drop
Output Signal
Load
<3V(20mA)
● High linearity (0.1% F.S.)
4 -20mA
● Isolation voltage(3000VDC/60S)
● Low voltage-drop(At 20mA<3V)
● High frequency response(15KHz)
● Extremely low temperature(35PPM/°C)
● Industry standard(Operating Temperature
Range:-25°C to 71°C)
Output Data
≤300Ω(At output Signal=20mA)
<0.05% meas.val./100Ω
Load Regulation
TRANSMISSION CHARACTERISTICS
Offset
0.1%F.S.
● High reliability(MTBF>500,000 hours)
Gain Error
Temperature Drift
0.1%F.S.
0.0035%F.S./°C(-25°C to +71°C)
ISOLATION CHARACTERISTICS
Galvanic Isolation
Two-port isolation(Between input and output)
3KVDC (Tested for 1minute and 1mA max, humidity < 70%)
1000MΩ,500VDC(Between input and output)
MODEL SELECTION
Isolation Voltage
Insulation Resistance
OTHER CHARACTERISTICS
Operation temperature:-25 to +71°C
Ambient
temperature
Transport and Storage temperature:-50 to +105°C
Package
Weight
DIP16/SOIC16
About 8g
Application
Environment
No dusts, gases of fiercely vibration, impulsion or gases that may
erode to the components surrounded
MORNSUN Science & Technology co.,Ltd.
Address: 2th floor 6th building, Huangzhou Industrial
District, Guangzhou, China
Tel: 86-20-38601850
Fax:86-20-38601272
Note:
1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load
unless otherwise specified.
2. Only typical models listed, specifications of custom product may be different. Please contact our
service people directly for certain conditions.
Http://www.mornsun-power.com
The copyright and authority for the interpretation of the products are reserved by Mornsun
Specifications subject to change without notice.
T1100RN/RS/N/S A/3-2008 Page 1 of 2