T Series
Subminiature Rocker Switches
Features/Benefits
Typical Applications
•
•
•
•
Compact size—small footprint
Single and double pole models
PC and panel mounting options available
RoHS compliant
•
•
•
Telecommunications
Instrumentation
Medical Equipment
Models Available
Specifications
Materials
CONTACT RATING: Q contact material (TX01 models): 3 AMPS @
CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or
diallyl phthalate (DAP), (UL 94V-0) or glass filled nylon 4/6, flame
retardant, heat stabilized.
120 V AC or 28 V DC. All other models: 2 AMPS @ 120 V AC or
28 V DC. See page H-50 for additional ratings.
ELECTRICAL LIFE: TX01 models: 60,000 make-and-break
cycles at full load. All other models: 30,000 cycles.
ACTUATOR: Nylon, black standard.
BUSHING: Brass, nickel plated.
CONTACT RESISTANCE: Below 20 m Ω typ. initial @
HOUSING: Stainless steel.
2–4 V DC, 100 mA, for both silver and gold plated contacts.
SWITCH SUPPORT: Brass, matte-tin plated.
MOUNTING BRACKET: Stainless steel.
9
INSULATION RESISTANCE: 10 Ω min.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
END CONTACTS: B contact material: Copper alloy, with gold plate
over nickel plate. Q contact material: Coin silver, silver plated.
See page G-50 for additional contact materials.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
CENTER CONTACTS & TERMINALS: B contact material: Copper alloy,
with gold plate over nickel plate. Q contact material: Copper alloy,
silver plated. See page G-53 for additional contact materials.
NOTE: Any models supplied with B, G, P, Q or R contact material are RoHS compliant.
TERMINAL SEAL: Epoxy.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
HARDWARE: Nut, Screws & Lockwasher: Stainless steel.
Standoff: Nylon standard.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages G-47 through G-51. For additional options not shown in catalog, consult Customer Service Center.
All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.
Switch Function
T101 SP On-None-On
Actuator
T102 SP Off-None-On
J1 Rocker, .300" wide
T103 SP On-Off-On
J6 Rocker, .230" wide
T105 SP Mom.-Off-Mom.
T107 SP On-Off-Mom.
T201 DP On-None-On
Terminations
A
Right angle, PC thru-hole
AV Vertical Right angle, PC thru-hole
Solder lug
V3 V-bracket
T205 DP Mom.-Off-Mom.
Z
Contact Material
B
P
Q
G
R
Gold
Gold, matte-tin
Silver
Gold over silver
Gold over silver, matte-tin
Seal
Epoxy
E
Actuator Color
Black
2
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G
www.ck-components.com
G–46