SY10E446JZTR

更新时间： 2024-01-06 10:48:12

品牌	Logo	应用领域
麦瑞 - MICREL		转换器
页数	文件大小	规格书
9页	85K
描述
4-BIT PARALLEL-TO-SERIAL CONVERTER

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

SY10E446JZTR 数据手册

SY10E446

Micrel, Inc.

SY100E446

4-BIT PARALLEL-TO-SERIAL

CONVERTER

SY10E446

SY100E446

DESCRIPTION

FEATURES

■ On-chip clock ÷4 and ÷8

The SY10/100E446 are integrated 4-bit parallel-to-

serial data converters. These devices are designed to

operate for NRZ data rates of up to a minimum of 1.3Gb/

s. The chips generate a divide-by-4 and a divide-by-8

clock for both 4-bit conversion and a two-chip 8-bit

conversion function. The conversion sequence was

chosen to convert the parallel data into a serial stream

from bit D0 to D3. A serial input is provided to cascade

two E446 devices for 8-bit conversion applications.

The SYNC input will asynchronously reset the internal

clock circuitry. This pin allows the user to reset the internal

clock conversion unit and, thus, select the start of the

conversion process.

■ Extended 100E VEE range of –4.2V to –5.5V

■ 1.6Gb/s typical data rate capability

■ Differential clock and serial inputs

■ VBB output for single-ended use

■ Asynchronous data synchronization

■ Mode select to expand to 8 bits

■ Internal 75KΩ input pulldown resistors

■ Fully compatible with Motorola MC10E/100E446

■ Available in 28-pin PLCC package

The MODE input is used to select the conversion mode

of the device. With the MODE input LOW (or open) the

device will function as a 4-bit converter. When the mode

input is driven HIGH, the internal load clock will change

on every eighth clock cycle, thus allowing for an 8-bit

conversion scheme using two E446s. When cascaded in

an 8-bit conversion scheme, the devices will not operate

at the 1.3Gb/s data rate of a single device. Refer to the

applications section of this data sheet for more information

on cascading the E446.

For lower data rate applications, a VBB reference

voltage is supplied for single-ended inputs. When

operating at clock rates above 500MHz, differential input

signals are recommended. For single-ended inputs, the

VBB pin is tied to the inverting differential input and

bypassed via a 0.01µF capacitor. The VBB provides the

switching reference for the input differential amplifier. The

VBB can also be used to AC couple an input signal.

PIN NAMES

SIN, SIN

D0 – D3

Function

Differential Serial Data Input

Parallel Data Input

SOUT, SOUT

CLK, CLK

CL/4, CL/4

CL/8, CL/8

MODE

Differential Serial Data Output

Differential Clock Input

Differential 4 Clock Output

Differential 8 Clock Output

Conversion Mode, 4-bit/8-bit

Conversion Synchronizing Input

VCC to Output

SYNC

VCCO

Rev.: F

Amendment:/0

M9999-032206

hbwhelp@micrel.com or (408) 955-1690

Issue Date: March 2006

12 3 4 5 6 7...9

中文翻译

下载PDF

与SY10E446JZTR相关器件

型号	品牌	获取价格	描述	数据表
SY10E451	MICREL	获取价格	6-BIT REGISTER DIFFERENTIAL DATA CLOCK
SY10E451_06	MICREL	获取价格	6-BIT REGISTER DIFFERENTIAL DATA CLOCK
SY10E451JC	MICROCHIP	获取价格	D Flip-Flop, 10E Series, 1-Func, Positive Edge Triggered, 6-Bit, True Output, ECL, PQCC28,
SY10E451JC	MICREL	获取价格	6-BIT REGISTER DIFFERENTIAL DATA CLOCK
SY10E451JCTR	MICREL	获取价格	6-BIT REGISTER DIFFERENTIAL DATA CLOCK
SY10E451JI	MICREL	获取价格	6-BIT REGISTER DIFFERENTIAL DATA CLOCK
SY10E451JI	MICROCHIP	获取价格	D Flip-Flop, 10E Series, 1-Func, Positive Edge Triggered, 6-Bit, True Output, ECL, PQCC28,
SY10E451JITR	MICREL	获取价格	6-BIT REGISTER DIFFERENTIAL DATA CLOCK
SY10E451JY	MICREL	获取价格	6-BIT REGISTER DIFFERENTIAL DATA CLOCK
SY10E451JY	MICROCHIP	获取价格	10E SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PQCC28

与SY10E446JZTR相关文章

BSS138LT3G：一款高效能N沟道MOSFET的全面解析
2024-07-04

9
解读EGP10B二极管资料手册：产品特性、参数分析
2024-07-04

9
RT9164AGG手册资料详解：引脚信息、设计指南
2024-07-04

11
2SA1037KPT资料详解：产品特性、电气参数、设计指南
2024-07-04

13

产品中心

服务支持

精选活动

关于我们

帮助中心

SY10E446JZTR

SY10E446JZTR 数据手册

与SY10E446JZTR相关器件

与SY10E446JZTR相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

SY10E446JZTR

SY10E446JZTR 数据手册

与SY10E446JZTR相关器件

与SY10E446JZTR相关文章

您还可以找

您在本页遇到什么问题？