5秒后页面跳转
SST58LD048-70-I-P1H PDF预览

SST58LD048-70-I-P1H

更新时间: 2024-11-29 07:15:11
品牌 Logo 应用领域
芯科 - SILICON 可编程只读存储器电动程控只读存储器电可擦编程只读存储器
页数 文件大小 规格书
40页 360K
描述
EEPROM

SST58LD048-70-I-P1H 数据手册

 浏览型号SST58LD048-70-I-P1H的Datasheet PDF文件第2页浏览型号SST58LD048-70-I-P1H的Datasheet PDF文件第3页浏览型号SST58LD048-70-I-P1H的Datasheet PDF文件第4页浏览型号SST58LD048-70-I-P1H的Datasheet PDF文件第5页浏览型号SST58LD048-70-I-P1H的Datasheet PDF文件第6页浏览型号SST58LD048-70-I-P1H的Datasheet PDF文件第7页 
SST ATA-Disk Chip  
SST58SD008 / 016 / 024 / 032 / 048 / 064 / 096 / 128 / 192  
SST58LD008 / 016 / 024 / 032 / 048 / 064 / 096 / 128 / 192  
SST58SD/LDxxxATA-Disk Chip  
8MB / 16MB / 24MB / 32MB / 48MB / 64MB / 96MB / 128MB / 192MB  
Preliminary Specifications  
FEATURES:  
ATA/IDE standard interface  
Controller Overhead Command to DRQ  
– 512 Bytes per sector  
ATA command set compatible  
– Support Data Transfer Speed up to PIO Mode-4  
Less than 0.5 ms  
Zero Power Data Retention  
Batteries not required for data storage  
Start Up Time  
8, 16, 24, 32, 48, 64, 96, 128, and 192 MByte  
capacities  
Sleep to read: 200 ns (typical)  
Sleep to write: 200 ns (typical)  
Power-on to Ready:200 ms (typical),  
500 ms (maximum)  
600 mil 32-pin DIP package  
Single Voltage Read and Write Operation  
5.0V-only for SST58SDxxx  
3.3V-only for SST58LDxxx  
Support for Both Commercial and Industrial  
Temperature Range  
Supports 5.0-Volt or 3.3-Volt Read and Write  
5V ± 10% or 3.3V ± 5% for Commercial  
5V ± 5% or 3.3V ± 5% for Industrial  
0°C to +70°C for Operating Commercial  
-40°C to +85°C for Operating Industrial  
-50°C to +100°C for non-Operating (storage)  
Low Power Consumption  
Extremely Rugged and Reliable  
Active mode: 30mA/50mA (3.3V/5.0V)(typical)  
Sleep mode: 200µA/300µA (3.3V/5.0V)(maximum)  
Built-in ECC support corrects 3 Bytes of error  
per 512 Byte sector  
Endurance: 1,000,000 cycles (typical)  
Greater than 1,000,000 hours MTBF  
Extended Data Protection and Security  
WP# pin for Data Protection  
Factory-Programmed, 20-Byte Unique ID number  
Intelligent ATA/IDE Controller  
Sustained Write Performance  
Built-in microcontroller with intelligent firmware  
Built-in Embedded Flash File System  
Up to 1.4MB/sec (host to flash)  
Power Management Unit  
Immediate disabling of unused circuitry  
PRODUCT DESCRIPTION  
SSTs ATA-Disk Chip (ADC) is a low cost, high perfor-  
mance, embedded flash memory data storage system.  
This product is well suited for solid state mass storage  
applications offering new and expanded functionality while  
enabling cost effective designs.  
dard interfaces; therefore, the ADC does not require addi-  
tional or proprietary software such as Flash File System  
(FFS) and Memory Technology Driver (MTD) software.  
The ADC is designed to work at either 5V ±10% or 3.3V  
±5%. The pin assignment is designed to match existing  
IDE signal traces on the motherboard. It uses standard ATA  
driver that is part of all major OS such as Windows 95/98/  
2000/NT/CE, MAC, UNIX, etc.  
ATA-based solid state mass storage technology is widely  
used in such products as portable and desktop computers,  
digital cameras, music players, handheld data collection  
scanners, cellular phones, PCS phones, PDAs, handy termi-  
nals, personal communicators, advanced two-way pagers,  
audio recorders, monitoring devices, and set-top boxes.  
All signals, except WP#, are in compliance with the ATA  
specifications. WP# is used to write protect the information  
stored on the ADC. The WP# can be either connected to  
motherboard write protect control logic or a jumper. When  
WP# is low, the ADC is write protected to prohibit any inad-  
vertent writes.  
ADC provides complete IDE Hard Disk Drive functionality  
and compatibility. ADC is a perfect solution to consumer  
electronic products requiring smaller, but more reliable and  
cost effective data storage. The ADC is read and written to  
using a single power supply of 5.0-Volts or 3.3-Volts and is  
available in 8 to 192 MByte capacities.  
Every ADC comes with factory-programmed, 20-Byte long,  
unique identification number for extended data protection.  
This feature prevents unauthorized duplication by allowing  
encryption of customer data.  
The ADC is a solid state disk drive that is designed to  
replace conventional IDE hard disk drive and uses stan-  
dard ATA/IDE protocol. It has built in microcontroller and file  
management firmware that communicates with ATA stan-  
The ADC is packaged in the 600 mil 32-pin DIP package  
for easy and cost effective mounting to the system mother-  
board.  
©2001 Silicon Storage Technology, Inc.  
The SST logo and SuperFlash are registered trademarks of Silicon Storage Technology, Inc.  
ATA-Disk Chip is a trademark of Silicon Storage Technology, Inc.  
S71167-04-000 6/01  
1
391  
These specifications are subject to change without notice.