512 Kbit / 1 Mbit (x8) Multi-Purpose Flash
SST39SF512 / SST39SF010
SST39SF512 / 0105.0V 512Kb / 1Mb (x8) MPF memories
Data Sheet
FEATURES:
•
•
•
Organized as 64K x8 / 128K x8
Single 5.0V Read and Write Operations
Superior Reliability
•
Fast Erase and Byte-Program:
– Sector-Erase Time: 7 ms (typical)
– Chip-Erase Time: 15 ms (typical)
– Byte-Program Time: 20 µs (typical)
– Chip Rewrite Time:
– Endurance: 100,000 Cycles (typical)
– Greater than 100 years Data Retention
2 seconds (typical) for SST39SF512
3 seconds (typical) for SST39SF010
•
Low Power Consumption:
– Active Current: 20 mA (typical)
– Standby Current: 10 µA (typical)
•
•
Automatic Write Timing
– Internal VPP Generation
End-of-Write Detection
•
•
Sector-Erase Capability
– Uniform 4 KByte sectors
Fast Read Access Time:
– Toggle Bit
– Data# Polling
– 70 ns
– 90 ns
•
•
TTL I/O Compatibility
JEDEC Standard
•
Latched Address and Data
– Flash EEPROM Pinouts and command sets
•
Packages Available
– 32-pin PLCC
– 32-pin TSOP (8mm x 14mm)
– 32-pin PDIP
PRODUCT DESCRIPTION
The SST39SF512/010 are CMOS Multi-Purpose Flash
(MPF) manufactured with SST’s proprietary, high perfor-
mance CMOS SuperFlash technology. The split-gate cell
design and thick oxide tunneling injector attain better reli-
ability and manufacturability compared with alternate
approaches. The SST39SF512/010 devices write (Pro-
gram or Erase) with a 5.0V-only power supply. The
SST39SF512/010 device conforms to JEDEC standard
pinouts for x8 memories.
function of the applied voltage, current, and time of applica-
tion. Since for any given voltage range, the SuperFlash
technology uses less current to program and has a shorter
erase time, the total energy consumed during any Erase or
Program operation is less than alternative flash technolo-
gies. These devices also improve flexibility while lowering
the cost for program, data, and configuration storage appli-
cations.
The SuperFlash technology provides fixed Erase and Pro-
gram times, independent of the number of Erase/Program
cycles that have occurred. Therefore the system software
or hardware does not have to be modified or de-rated as is
necessary with alternative flash technologies, whose Erase
and Program times increase with accumulated Erase/Pro-
gram cycles.
Featuring high performance Byte-Program, the
SST39SF512/010 devices provide a maximum Byte-Pro-
gram time of 30 µsec. These devices use Toggle Bit or
Data# Polling to indicate the completion of Program opera-
tion. To protect against inadvertent write, they have on-chip
hardware and Software Data Protection schemes.
Designed, manufactured, and tested for a wide spectrum of
applications, these devices are offered with a guaranteed
endurance of 10,000 cycles. Data retention is rated at
greater than 100 years.
To meet high density, surface mount requirements, the
SST39SF512/010 are offered in 32-pin PLCC packages,
32-pin TSOP, and a 600 mil, 32-pin PDIP is also available.
See Figures 1, 2, and 3 for pinouts.
The SST39SF512/010 devices are suited for applications
that require convenient and economical updating of pro-
gram, configuration, or data memory. For all system appli-
cations, they significantly improve performance and
reliability, while lowering power consumption. They inher-
ently use less energy during erase and program than alter-
native flash technologies. The total energy consumed is a
Device Operation
Commands are used to initiate the memory operation func-
tions of the device. Commands are written to the device
using standard microprocessor write sequences. A com-
mand is written by asserting WE# low while keeping CE#
©2001 Silicon Storage Technology, Inc.
The SST logo and SuperFlash are registered trademarks of Silicon Storage Technology, Inc.
MPF is a trademark of Silicon Storage Technology, Inc.
S71149-03-000 4/01
1
394
These specifications are subject to change without notice.
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
