5秒后页面跳转
SST28SF040A-90-4C-PH PDF预览

SST28SF040A-90-4C-PH

更新时间: 2024-11-21 22:25:07
品牌 Logo 应用领域
SST 内存集成电路光电二极管可编程只读存储器电动程控只读存储器电可擦编程只读存储器
页数 文件大小 规格书
24页 321K
描述
4 Mbit (512K x8) SuperFlash EEPROM

SST28SF040A-90-4C-PH 数据手册

 浏览型号SST28SF040A-90-4C-PH的Datasheet PDF文件第2页浏览型号SST28SF040A-90-4C-PH的Datasheet PDF文件第3页浏览型号SST28SF040A-90-4C-PH的Datasheet PDF文件第4页浏览型号SST28SF040A-90-4C-PH的Datasheet PDF文件第5页浏览型号SST28SF040A-90-4C-PH的Datasheet PDF文件第6页浏览型号SST28SF040A-90-4C-PH的Datasheet PDF文件第7页 
4 Mbit (512K x8) SuperFlash EEPROM  
SST28SF040A / SST28VF040A  
SST28SF040A / SST28VF040A5.0 & 2.7 4Mb (x8) Byte-Program, Small Erase Sector flash memories  
Data Sheet  
FEATURES:  
Single Voltage Read and Write Operations  
Fast Read Access Time  
– 5.0V-only for SST28SF040A  
– 2.7-3.6V for SST28VF040A  
5.0V-only operation: 90 and 120 ns  
2.7-3.6V operation: 150 and 200 ns  
Superior Reliability  
Latched Address and Data  
Endurance: 100,000 Cycles (typical)  
Greater than 100 years Data Retention  
Hardware and Software Data Protection  
7-Read-Cycle-Sequence Software Data  
Memory Organization: 512K x8  
Protection  
Sector-Erase Capability: 256 Bytes per Sector  
Low Power Consumption  
End-of-Write Detection  
Toggle Bit  
Data# Polling  
Active Current: 15 mA (typical) for 5.0V and  
10 mA (typical) for 2.7-3.6V  
Standby Current: 5 µA (typical)  
TTL I/O Compatibility  
JEDEC Standard  
Fast Sector-Erase/Byte-Program Operation  
Flash EEPROM Pinouts  
Packages Available  
Byte-Program Time: 35 µs (typical)  
Sector-Erase Time: 2 ms (typical)  
Complete Memory Rewrite: 20 sec (typical)  
32-lead PLCC  
32-lead TSOP (8mm x 14mm and 8mm x 20mm)  
32-pin PDIP  
PRODUCT DESCRIPTION  
The SST28SF/VF040A are 512K x8 bit CMOS Sector-  
Erase, Byte-Program EEPROMs. The SST28SF/VF040A  
are manufactured using SSTs proprietary, high perfor-  
mance CMOS SuperFlash EEPROM Technology. The  
split-gate cell design and thick oxide tunneling injector  
attain better reliability and manufacturability compared with  
alternative approaches. The SST28SF/VF040A erase and  
program with a single power supply. The SST28SF/  
VF040A conform to JEDEC standard pinouts for byte wide  
memories and are compatible with existing industry stan-  
dard flash EEPROM pinouts.  
cations, the SST28SF/VF040A significantly improve  
performance and reliability, while lowering power consump-  
tion when compared with floppy diskettes or EPROM  
approaches. Flash EEPROM technology makes possible  
convenient and economical updating of codes and control  
programs on-line. The SST28SF/VF040A improve flexibil-  
ity, while lowering the cost of program and configuration  
storage application.  
The functional block diagram shows the functional blocks of  
the SST28SF/VF040A. Figures 1, 2, and 3 show the pin  
assignments for the 32-lead PLCC, 32-lead TSOP, and 32-  
pin PDIP packages. Pin descriptions and operation modes  
are described in Tables 2 through 5.  
Featuring high performance programming, the SST28SF/  
VF040A typically Byte-Program in 35 µs. The SST28SF/  
VF040A typically Sector-Erase in 2 ms. Both Program and  
Erase times can be optimized using interface features such  
as Toggle bit or Data# Polling to indicate the completion of  
the Write cycle. To protect against an inadvertent write, the  
SST28SF/VF040A have on chip hardware and Software  
Data Protection schemes. Designed, manufactured, and  
tested for a wide spectrum of applications, the SST28SF/  
VF040A are offered with a guaranteed sector endurance of  
10,000 cycles. Data retention is rated greater than 100  
years.  
Device Operation  
Commands are used to initiate the memory operation func-  
tions of the device. Commands are written to the device  
using standard microprocessor write sequences. A com-  
mand is written by asserting WE# low while keeping CE#  
low. The address bus is latched on the falling edge of WE#  
or CE#, whichever occurs last. The data bus is latched on  
the rising edge of WE# or CE#, whichever occurs first.  
Note, during the Software Data Protection sequence the  
addresses are latched on the rising edge of OE# or CE#,  
whichever occurs first.  
The SST28SF/VF040A are best suited for applications that  
require reprogrammable nonvolatile mass storage of pro-  
gram, configuration, or data memory. For all system appli-  
©2001 Silicon Storage Technology, Inc.  
The SST logo and SuperFlash are registered trademarks of Silicon Storage Technology, Inc.  
SSF is a trademark of Silicon Storage Technology, Inc.  
S71077-04-000 6/01  
1
310  
These specifications are subject to change without notice.  

与SST28SF040A-90-4C-PH相关器件

型号 品牌 获取价格 描述 数据表
SST28SF040A-90-4C-WH SST

获取价格

4 Mbit (512K x8) SuperFlash EEPROM
SST28SF040A-90-4I-EH SST

获取价格

4 Mbit (512K x8) SuperFlash EEPROM
SST28SF040A-90-4I-NH SST

获取价格

4 Mbit (512K x8) SuperFlash EEPROM
SST28SF040A-90-4I-PH SST

获取价格

4 Mbit (512K x8) SuperFlash EEPROM
SST28SF040A-90-4I-WH SST

获取价格

4 Mbit (512K x8) SuperFlash EEPROM
SST28VF040-300-3C-PH SILICON

获取价格

Flash, 512KX8, 300ns, PDIP32
SST28VF040A SST

获取价格

4 Mbit (512K x8) SuperFlash EEPROM
SST28VF040A-120-4C-EH SST

获取价格

4 Mbit (512K x8) SuperFlash EEPROM
SST28VF040A-120-4C-NH SST

获取价格

4 Mbit (512K x8) SuperFlash EEPROM
SST28VF040A-120-4C-PH SST

获取价格

4 Mbit (512K x8) SuperFlash EEPROM