Preliminary Data Sheet
SRF-1016
SRF-1016Z
65 - 300 MHz
RoHS Compliant
& Green Package
Product Description
Pb
The Sirenza Microdevices’ SRF-1016 is a quadrature demodulator
RFIC designed for UHF and microwave receiver IF applications. This
device features switchable gain control, high P1dB, and excellent I/Q
amplitude and phase balance.
Silicon Germanium IF Receiver
Use of this highly integrated device can result in lower component
count, a more compact assembly, and higher transceiver card yields.
The device is packaged in an industry standard 16 pin TSSOP with
exposed paddle for superb RF and thermal ground.
The matte tin finish on Sirenza’s lead-free package utilizes a post
annealing process to mitigate tin whisker formation and is RoHS com-
pliant per EU directive 2002/95. This package is also manufactured
with green molding compounds that contain no antimony trioxide nor
halogenated fire retardants.
16 pin TSSOP with Exposed Ground Pad
Package Footprint: 0.197 x 0.252 inches (5.0 x 6.4 mm)
Package Height: 0.039 inches (1.0 mm)
Product Features
• Available in Lead Free, RoHS compliant, and
Green packaging
Functional Block Diagram
• Gain control in 20dB steps
BBIN
BBIP
VCC
GC2
GC1
VEE
VCC
INP
1
2
3
4
5
6
7
8
16 BBQP
15 BBQN
14 VCC
13 LOP
12 LON
11 VEE
10 VCC
• Excellent I/Q amplitude and phase balance
• Output P1dB > +4 dBm over all gain settings
0/90
Applications
• Digital and spread spectrum communication
systems
• Cellular, PCS, DCS, 2G, 2.5G, 3G transceivers
• ISM band transceivers
• Point-to-point microwave receivers
• Broadband wireless systems
9
INN
Product Specifications – IF Input (Test conditions are on page 2)
Parameters
Test Conditions
Unit
MHz
dB
Min.
Typ.
Max.
IF Frequency Range
65
300
INP/INN Return Loss
INP/INN Common mode voltage
Gain
50 ohm nominal differential input, Note 1
Internally generated
20
2
V
dB
28
31
33
14
-4
High gain setting
Input P1dB
dBm
dB
-26
-24
11
GC1 = GC2 = +5V
DSB Noise Figure
Gain
dB
9
12
Medium gain setting
GC1 = +5V
Input P1dB
dBm
dB
-8
-6
GC2 = 0V
DSB Noise Figure
Gain
14.5
-6.5
14
dB
-9
Low gain setting
GC1 = GC2 = 0V
Input P1dB
dBm
dB
12
DSB Noise Figure
31
The information provided herein is believed to be reliable at press time. Sirenza Microdevices assumes no responsibility for inaccuracies or ommisions.
Sirenza Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the
circuits described herein are implied or granted to any third party. Sirenza Microdevices does not authorize or warrant any Sirenza Microdevices product for use in life-support devices and/or systems. Copyright 2006 Sirenza Microdevices, Inc. All
worldwide rights reserved.
303 South Technology Court
Broomfield, CO 80021
Phone: (800) SMI-MMIC
1
http://www.sirenza.com
EDS 102092 Rev B