Type SPSX Solid Polymer Aluminum SMT Capacitors
The solid polymer SPSX aluminum capacitor is an
ideal choice for audio/visual equipment, home
appliances, computers, measuring equipment and
industrial robots. Like the SPCX, the SPSX is a compact
component. But SPSX offers a much lower ESR and a
higher ripple current rating than the SPCX. The SPSX
is a green product and RoHS compliant.
Highlights
•ꢀ A low-profile height of 1.9 mm
•ꢀ Offered on tape and reel
•ꢀ Can withstand 260 ºC reflow for 10 s
•ꢀ 4.5 - 9 mΩ ESR @ 100 kHz
Complies with the EU Directive 2002/95/EC
requirement restricting the use of Lead ꢁPb),
Mercury ꢁHg), Cadmium ꢁCd), Hexavalent chro-
mium ꢁCrꢁVI)), PolyBrominated Biphenyls ꢁPBB)
andPolyBrominated Diphenyl Ethers ꢁPBDE).
•ꢀ A great value in a small package
Specifications
Operating Temperature Range:
Capacitance Range:
–40 ºC to +105 ºC
82 µF to 560 µF
Operating Working Range:
Capacitance Tolerance:
Surge Voltage:
2.0, 2.5, 4.0, 6.3 Vdc
20 ꢀ ꢁ120 Hz @ 20 ºC)
Vdc
2.0
2.5
2.5
3.1
4.0
5.0
6.3
8.0
Surge
Rated Ripple Current:
See ratings table
Surge Test:
Life Test:
Test temperature is +15 ºC to +35 ºC in series with
a 1000 Ω resistor with the surge voltage applied for
1000 cycles of 30 5 s ꢁON) and 5 min 30 s ꢁOFF)
•ꢀ Leakage current: I≤0.1CV
Apply rated voltage at +105 ºC 2 ºC for 1000 h
* Leakage current: ≤ ratings table values
* Capacitance: 10ꢀ of initial measured value
* DF: ≤ ratings table values
•ꢀ Capacitance: 10ꢀ of initial measured value
•ꢀ DF: ≤ the values in the ratings table
•ꢀ Appearance: No abnormal change to occur
* Appearance: No abnormal change to occur
Moisture Resistance:
+60 ºC 2 ºC @ 90ꢀ RHꢂ rated voltage for 500 h
* Leakage current: ≤ rating table values
* Capacitance: +70ꢀ, –20ꢀ ꢁ2V, 2.5V)
+60ꢀ, –20ꢀ ꢁ4V)
+50ꢀ, –20ꢀ ꢁ6.3V)
of initial measured value
* DF: ≤200ꢀ of initial specified value
* Appearance: No abnormal change to occur
Vibration:
10 Hz to 2000 Hz to 10 Hz frequency applied one
cycle per 20 min at a total amplitude of 1.5 mm.
Direction and duration of vibration will be 2 h each in
the X,Y and Z planes for total of 6 h with the capacitor
soldered in place.
•ꢀ Appearanceꢂ No abnormal change to occur.
•ꢀ Capacitance: Measured value to be stabilized
during test, when measured several times
within 30 min before completion of test.
Shelf Life Test:
+105 ºC 2 ºC for 500 h
Leakage current: ≤ rating table values
Capacitance: 10ꢀ of initial measured value
DF: ≤ ratings table values
Appearance: No abnormal change to occur
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com