1
Optoway
SPS-23100WG
***********************************************************************************************************************************************************************
SPS-23100WG/SPS-23100BWG/SPS-23100AWG
(RoHS Compliant)
10.3 Gb/s / 100 km / 1550 nm Digital Diagnostic SFP+ LC SINGLE-MODE TRANSCEIVER
***********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Support 9.95 Gbps to 10.5 Gbps
l Complaint with SFP+ MSA
The SPS-23100WG series single mode transceiver is small
form factor pluggable module for bi-directional serial
optical data communications such as IEEE 802.3ae
10GBASE-ZR/ZW and 10G Fibre Channel. It is with the
SFP+ 20-pin connector to allow hot plug capability. Digital
diagnostic functions are available via an I2C. This module is
designed for single mode fiber and operates at a nominal
wavelength of 1550 nm. A guaranteed minimum optical
link budget of 24 dB is offered which can correspond to a
link distance of over 100 km (assuming worst case fiber loss
l Compliant to IEEE 802.3ae 10GBASE-ZR/ZW
l SFF-8472 Digital Diagnostic Function
l Temperature-stabilized 1550 nm EML Transmitter
l Distance up to 100 km at SM Fiber
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l Low Power Consumption
l RoHS 6/6 Compliant
l 0 to 70oC Operating: SPS-23100WG
l -5 to 85oC Operating: SPS-23100BWG
l -40 to 85oC Operating: SPS-23100AWG
l Class 1 Laser International Safety Standard IEC-60825
Compliant
of 0.22 dB/km). The transmitter section uses
a
temperature-stabilized 1550 nm electrical-modulated laser
(EML) and is a class 1 laser compliant according to
International Safety Standard IEC-60825. The receiver
section uses an integrated InGaAs avalanche photo detector
preamplifier mounted in an optical header and a limiting
post-amplifier IC.
APPLICATIONS
l 100 km 10G Ethernet
l 100 km OC-192 / STM-64
l 100 km 10G Fibre Channel
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
10GBASE
Distance
(km)
Wavelength
(nm)
Package
Temp.
(oC)
RoHS
Compliant
SPS-23100WG
SPS-23100BWG
SPS-23100AWG
10.3
10.3
10.3
ZR / ZW
ZR / ZW
ZR / ZW
100
100
100
1550 EML
1550 EML
1550 EML
SFP+ with DMI
SFP+ with DMI
SFP+ with DMI
0 to 70
-5 to 85
-40 to 85
Yes
Yes
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
85
85
70
85
85
3.6
-4
Units
Notes
Storage Temperature
Relative Humidity
Operating Case Temperature
Tstg
RH
Topr
-40
5
0
-5
-40
-0.5
oC
%
Non-condensing
SPS-23100WG
SPS-23100BWG
SPS-23100AWG
oC
Power Supply Voltage
Receiver Input Optical Power
Vcc
Mip
V
dBm
Average power
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
12/1/2010 V2.0